Plexiglass fine scratch remover
Is there an effective product out there to remove fine scratches from the top cover of the GM CAI?
|
I’d suggest this product. We manufacture parts from acrylic/plexiglass. After machining we remove the cutter swirls from the end mill by wet sanding to smooth the surface. After that we polish the acrylic/plexiglass with a very similar product to what I’m suggesting. $20 and some of your time and you should be good to go.
I doubt you need to wet sand. If you do I wouldn’t use an aggressive grit. If you do need to wet sand I’d also suggest getting the 2” hook and loop kit. Maybe 4000 grit to start and keep it soaked. https://www.amazon.com/Novus-7100-Pl...02UCYRZU&psc=1 |
Thank you
|
All times are GMT -5. The time now is 10:02 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.