CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Transmissions (https://www.camaro6.com/forums/forumdisplay.php?f=253)
-   -   Wont shift into 6th (https://www.camaro6.com/forums/showthread.php?t=593399)

Azmedian 06-07-2021 12:29 AM

Wont shift into 6th
 
2020 2ss 1le 6 speed manual Track mode wouldn't shift into 6th gear. Less Than 300 miles on OD


I wasn't going that fast 55 mph in 5th and went to shift into 6th it wouldn't go into 6th gear. Pulled straight back from 5th like there was no "Gate" for 6th.


I didn't check any other modes.



Just seemed odd. unless i wasn't going fast enough for 6th ?

No 6th in track mode?


Just seemed odd, before I go to dealer and they point out I'm an idiot, anyone have this problem ??


:bonk: Update it goes int 6th I'm stupid 6/7/21

UnknownJinX 06-07-2021 01:03 AM

The only electronic restriction in the TR-6060 is the 1-4 CAGS, AKA skip shift. You can shift into 6th any time.

Personally, I think 6th gear is fine as long as you are above 50 MPH on flat ground.

Kind of odd that you can't shift into 6th. Usually, people can have some issue shifting into 2nd when the transmission is cold. Have you tried shifting with the car off?

Azmedian 06-07-2021 01:23 AM

Quote:

Originally Posted by UnknownJinX (Post 11022012)
The only electronic restriction in the TR-6060 is the 1-4 CAGS, AKA skip shift. You can shift into 6th any time.

Personally, I think 6th gear is fine as long as you are above 50 MPH on flat ground.

Kind of odd that you can't shift into 6th. Usually, people can have some issue shifting into 2nd when the transmission is cold. Have you tried shifting with the car off?




Ill try it tomorrow with car off see what happens

WhiteMale 06-07-2021 07:39 AM

You shouldn't be locked out of 6th in any mode. 6th at 55 is too low in RPM but that's IMVHO, but still shouldn't be locked out.

Infamus 06-07-2021 08:03 AM

take it to the dealer...

UnknownJinX 06-07-2021 10:42 AM

Quote:

Originally Posted by WhiteMale (Post 11022070)
You shouldn't be locked out of 6th in any mode. 6th at 55 is too low in RPM but that's IMVHO, but still shouldn't be locked out.

On flat ground, you are perfectly fine. IMO anything above 1100 RPM on flat surface is okay. Small block has good enough low-end torque for that to work.


All times are GMT -5. The time now is 11:25 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.