2019s have camera in spoiler , swap possible?
I'm looking into the 2019 but really don't like the stanchion spoiler and would like to swap it out , have any vendors addressed the fact that thers now a camera in there ?
|
Just add an aftermarket camera above the license plate portion like it was in the 6th gen if you remove the factory spoiler. What's the main concern you're having?
|
The 19s have 2 cameras , one in the spoiler and one by the license plate so you can’t move the one from the spoiler to the other spot
|
Quote:
|
Quote:
To the OP - as far as I know, none of the aftermarket vendors have offered a solution to this, so I think you would be on your own to retrofit the spoiler camera into your new addition. I think this would be easier for some, such as the blade spoilers - less likely with a ZL1 style spoiler. |
Gen5DIY is working on a kit it will require the 19 Spoiler if I recall.
|
I'm sure if you give it another few more months, all the newer kits for 2019 models will come out on the market.
|
We will be bring out the one for the 2019 cars starting this week, and we will mod the one for the GM 3 pc spoiler to start.
|
Quote:
|
Quote:
|
I'm hearing the camera was moved into the shark fin antenna for 2020. You might even want to do that instead.
https://www.camaro6.com/forums/showp...&postcount=146 |
Quote:
|
Quote:
Any other vendors working on a 2019 "camera spoiler" alternative? Really not a fan of the stock spoiler on my ZL1. |
Bump for info on this dilemma. Us Convertible guys will need a solution that does not involve the sharkfin camera as it would be partially or wholly obscured by either the spoiler or the stanchion.
I have a couple of spoilers on the way and an after market camera to see if i can fit it. Otherwise I'll have to cut the factory Camera out of the stock spoiler and fit it in whichever one I decide to run. Will report on the outcome |
All times are GMT -5. The time now is 03:57 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.