CAMARO6 - LT2 intake manifold

CAMARO6 (https://www.camaro6.com/forums/index.php)

- V8 LT1 Engine, Exhaust, and Bolt-Ons (https://www.camaro6.com/forums/forumdisplay.php?f=231)

- - LT2 intake manifold - 90° fitting (https://www.camaro6.com/forums/showthread.php?t=590808)

Trochoidal

04-08-2021 08:21 PM

LT2 intake manifold - 90° fitting

4 Attachment(s)

Finally found an off the shelf 90° fitting for LT2 intake manifold. This is good if you don’t want your hose shooting towards the hood. Also will probably help to keep from hitting the insulation on the hood too. Barb is sized and should work fine for 3/8” hose. Bundy fitting is 10mm.

https://www.amazon.com/Dorman-800-17.../dp/B00CI6FBYE

appleman22

01-31-2022 09:37 PM

Thanks for this! It’s a big help!!!

Trochoidal

02-01-2022 04:14 PM

Quote:

Originally Posted by appleman22 (Post 11128179)

Thanks for this! It’s a big help!!!

No problem and you’re welcome.

All times are GMT -5. The time now is 09:03 PM.