Seemingly accurate ZL1 1LE Bumper

iadunlap · 03-06-2018, 06:24 PM

https://www.ebay.com/itm/Fits-16-18-...0AAOSw4aFal9Lo

Thoughts?

soloknight6 · 03-06-2018, 06:50 PM

Ikon makes good stuff. should be a great fit if installed properly. Reach out to them for the specifics.

cleoent · 03-06-2018, 06:52 PM

Going to sell like hotcakes...

Arugon · 03-06-2018, 06:59 PM

Is this meant for the SS model?

iadunlap · 03-06-2018, 09:53 PM

Quote:

Originally Posted by Arugon

Is this meant for the SS model?

Based on the listing, no. I believe it'll be for all models.

iadunlap · 03-06-2018, 09:54 PM

Quote:

Originally Posted by soloknight6

Ikon makes good stuff. should be a great fit if installed properly. Reach out to them for the specifics.

Already emailed them! Hoping for a response soon.

gpskinzhut · 03-07-2018, 08:24 AM

Been posted a few times already and is mentioned in the AA bumper thread as well.

http://www.camaro6.com/forums/showthread.php?t=521805

When I'd emailed them awhile back, they said it was a direct bolt on for the SS.

iadunlap · 03-07-2018, 08:48 AM

Quote:

Originally Posted by gpskinzhut

Been posted a few times already and is mentioned in the AA bumper thread as well.

http://www.camaro6.com/forums/showthread.php?t=521805

When I'd emailed them awhile back, they said it was a direct bolt on for the SS.

This one is different, it is the 1LE version...

blazzin1 · 03-07-2018, 09:08 AM

Quote:

Originally Posted by iadunlap

https://www.ebay.com/itm/Fits-16-18-...0AAOSw4aFal9Lo

Thoughts?

Dang, that does look good! My only question would be if the standard vertical DRL’s still fit in the bezels?

gpskinzhut · 03-07-2018, 09:14 AM

Quote:

Originally Posted by iadunlap

This one is different, it is the 1LE version...

Mm, just noticed. My bad. My money is on it being the same base bumper they'd used in regular ZL1 one. Does state it fits the entire line. I'm going to have to pony up for one of them at some point.

iadunlap · 03-07-2018, 10:12 AM

Quote:

Originally Posted by blazzin1

Dang, that does look good! My only question would be if the standard vertical DRL’s still fit in the bezels?

If its anything like the actual 1LE bumper (which so far it seems like it) then i would say no...but I kind of like the no DRL look on them.

thefirstcause · 03-07-2018, 10:41 AM

This may be in my future. Not sure when but it is exactly what I wanted. That 1LE grille is so badass.

iadunlap · 03-07-2018, 11:26 AM

Quote:

Originally Posted by thefirstcause

This may be in my future. Not sure when but it is exactly what I wanted. That 1LE grille is so badass.

Same for certain, this along with the C7 wing will be killer.

Alanarchy · 03-07-2018, 03:42 PM

Wasn`t considering this, but I might now in the future. I hope that ZL1 badge can be removed though.

03-06-2018, 06:24 PM	#1
iadunlap Drives: 2016 Camaro RS Join Date: Dec 2017 Location: Atlanta, GA Posts: 23	Seemingly accurate ZL1 1LE Bumper https://www.ebay.com/itm/Fits-16-18-...0AAOSw4aFal9Lo Thoughts?

03-06-2018, 06:50 PM	#2
soloknight6 SoCal HT5! SD Drives: 2016 red hot 2ss M6 Join Date: Nov 2011 Location: San Diego CA, Posts: 1,929	Ikon makes good stuff. should be a great fit if installed properly. Reach out to them for the specifics. __________________ http://www.camaro5.com/forums/showth...37#post5437037 By my deeds, I honor him. V8!!!

03-06-2018, 06:52 PM	#3
cleoent Drives: 16' Camaro E-Force SS Join Date: Jul 2016 Location: Morgan Hill, Ca Posts: 836	Going to sell like hotcakes... __________________ Leo 2016 e-Force 2SS Instagram @cleoent

03-06-2018, 06:59 PM	#4
Arugon Drives: Summit White Camaro SS Join Date: Jul 2017 Location: California Posts: 359	Is this meant for the SS model? __________________

03-07-2018, 08:24 AM	#7
gpskinzhut Drives: 2017 ZL1 A10 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,964 View My Garage	Been posted a few times already and is mentioned in the AA bumper thread as well. http://www.camaro6.com/forums/showthread.php?t=521805 When I'd emailed them awhile back, they said it was a direct bolt on for the SS. __________________ 2017 ZL1 A10 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

03-07-2018, 10:41 AM	#12
thefirstcause Drives: 2016 Camaro 1SS, 2009 Mazda6 GT V6 Join Date: May 2015 Location: Canada Posts: 248	This may be in my future. Not sure when but it is exactly what I wanted. That 1LE grille is so badass.

03-07-2018, 03:42 PM	#14
Alanarchy Drives: 2017 Camaro SS NGM, 2015 Murano Plt Join Date: Apr 2016 Location: Bay Area/ Whittier Posts: 251	Wasn`t considering this, but I might now in the future. I hope that ZL1 badge can be removed though.

User Name		Remember Me?
Password