03-22-2017, 09:11 PM | #1 |
Drives: 2016 Camaro SS Join Date: Apr 2015
Location: Petaluma, California
Posts: 516
|
ROHANA RC10
I'm looking into getting a set of Rohana RC10 wheels, along with a new set of tires for my Camaro. I've found 10x20 with a 25mm offset in the front and 11x20 with a 28mm offset in the rear. I'm trying to figure out if the offset will work for a stock wheel setup or 10mm wider all round. I apologize if this is a silly question, but I'm no the best at this.
__________________
Hyper Blue 2SS Auto, Duel Mode Exhaust, MCR, Nav, Black 5 Spoke
Ordered on 8/29 2000 Status on 9/1 3000 Status on 9/3 3300 Status on 10/8 3400 Status on 10/9 3800 Status on 10/19 Delivery 12/28 |
03-22-2017, 10:08 PM | #2 |
Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
Talk to Paul at PK Auto Design. He will not steer you wrong:
Direct Phone: 818-632-8943
__________________
Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
03-23-2017, 04:01 AM | #3 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
20x11 with 28mm offset is a No Go. 10mm too much.
Should be 38mm to 43mm.
__________________
|
|
|
Post Reply
|
|
|