11-27-2015, 10:10 AM | #1 |
Drives: 2012 Cyber Grey 2SS 6 Speed AT Join Date: Nov 2015
Location: Texas
Posts: 8
|
MMR 228 Z/28 Replica help
Looking to purchase these wheels for my 2012 2SS but wondering if anyone has had any experience with them. My concern is if they will stick out or be tucked like factory wheels. They list the dimensions of but do not mention any offset.
- Staggered Full Set - (2) 20x10 MRR 228 Camaro Z28 Replica Wheels Gloss Graphite (2) 20x11 MRR 228 Camaro Z28 Replica Wheels Gloss Graphite https://www.elementwheels.com/prodde...gmmrr2282011gm
__________________
Modifications: Port and polished throttle body 21st CMC custom dyno tune Stoptech slotted rotors and Hawk pads Long tube stainless works headers with high flow cats Borla "ATAK" catback exhaust CAI cold air intake Yank Billet custom 3000 stall torque converter Custom transmission Cooler |
11-27-2015, 10:17 AM | #2 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
They fill the wheel wells quite a bit more but do not stick out.
|
11-27-2015, 11:07 AM | #3 |
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
here are some pics of mine,,, they don't stick out
|
11-27-2015, 02:10 PM | #4 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
NICE Looking car!
|
11-27-2015, 05:40 PM | #5 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
There is a whole topic with pics: http://www.camaro5.com/forums/showthread.php?t=399653
|
12-06-2015, 10:38 AM | #6 |
Drives: '12 Black, silver stripes, drop top Join Date: Oct 2015
Location: THIRD COAST - CC, TX
Posts: 6
|
bmbbl be, I like your stance of your car. What is your suspension, wheels/tire set up? I am about to get some MRR 228 wheels and want to make sure i get that aggressive look...thanks!
|
12-07-2015, 11:11 PM | #7 | |
Drives: 2015 AGM 1SS Join Date: Nov 2015
Location: Home(Indiana) Work(Cincinnati)
Posts: 273
|
Quote:
Front: 20x10 ET 23 Rear: 20x11 ET 43 Front: 285/35/20 Rear: 315/35/20 I'm dropping the car 1" on all corners with BMR Springs. I think that will be pretty aggressive... But not overkill |
|
12-09-2015, 12:52 PM | #8 |
2010 transformer
Drives: 2010 ss camaro Join Date: Nov 2014
Location: Lee's summit mo
Posts: 591
|
like the wheels and they are made for these cars
__________________
2010 transformer, vertical doors, 315nt05 rears, pedders supercar coilovers, hotchkis sway bars, links, adjustable, toe bars, bmr poly cradle bushings, 1le control arms, bmr tunnel brace, bmr subframe connectors. Cam 227/239-623-620@114 Mast medium bore heads, sw 1 7/8 headers, cat delete, x pipe, 3" dynomax true duals, fuel rails, fast 102 intake and NW 102 throttle body, catch can, rotofab cai, shifter, raptor custom shift light. Dss drive shaft, 3.91 gears. 492 rwhp
|
12-11-2015, 04:57 PM | #9 | |
Drives: '12 Black, silver stripes, drop top Join Date: Oct 2015
Location: THIRD COAST - CC, TX
Posts: 6
|
Quote:
Thanks! I have heard anywhere from 1" to 2" drop with these. I think i will do 1.25.. |
|
|
|
|
|