07-07-2013, 08:31 PM | #1 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
SOLD Take my OEM Cats, please.
Sale Pending
OEM CATS with o2 sensors... if you can get them out good luck. I rounded them off. The connections are in tact and the sensors operate as designed. Hell if you want to pay for the extra shipping I'll even throw in the OEM manifolds... no charge. Of course these are used with about 5000 miles on them. Make an offer these can ship tomorrow. Last edited by tramtwo; 07-25-2013 at 09:13 AM. |
07-07-2013, 08:42 PM | #2 |
|
GLWS, but you might want to try: www.sellyourcatsdirect.com
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
07-07-2013, 10:30 PM | #3 |
Drives: 1985 Chevy 1500 Join Date: Jun 2013
Location: Houston
Posts: 11
|
What year? And do you have a picture
|
07-08-2013, 01:32 AM | #4 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
O2s are very easy to remove with the right tool and an extra hand. Might want to try heating them up.
GLWS
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
07-08-2013, 09:45 AM | #5 | |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
These are off my 2013 SSS 1LE. Photos will be up at lunch time.
Quote:
Yes most are very easy... these are a bitch. Good news they are ready to go if someone wants to install these. I think new o2 sensors go for about 45 bucks a piece. I have the gaskets and the bolts as well. Shipping by ground ups is between 40 and 75 bucks from new orleans. |
|
07-08-2013, 12:02 PM | #6 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Photos
Sent from my DROID RAZR using Tapatalk 2 |
07-08-2013, 01:10 PM | #7 |
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
In my professional opinion....you're not alone. LOL
Of the hundreds of headers I've done, these newer LS3/L99s are by far the worst. I don't know how or who is installing them but 2/3 are cross threaded and nothing helps since they were driven in sideways. Heat and torches can work but either way, you're going to be rethreading and getting a new HO2. Sucks I know. Good luck sir!! Ivan @ Southwest Speed |
07-08-2013, 01:13 PM | #8 |
Drives: . Join Date: Nov 2012
Location: .
Posts: 1,085
|
The rear 02's were a real bear to remove, but I got mine out, just soaked them with some WD40.
When I looked at the threads on the 02's, it looked like someone peened the threads so they wouldn't come out. The fronts were fine though. |
07-08-2013, 01:35 PM | #9 | |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Quote:
May be the Canadians way of getting even with us. |
|
07-08-2013, 03:13 PM | #10 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Sale Pending...
|
07-24-2013, 08:23 PM | #11 |
Drives: 1985 Chevy 1500 Join Date: Jun 2013
Location: Houston
Posts: 11
|
you sell the manifolds?
|
07-24-2013, 09:55 PM | #12 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Yes.
Sent from my DROID RAZR using Tapatalk 2 |
|
|
|
|