07-03-2020, 11:21 AM | #197 | |
Drives: '17 ZL1 Join Date: Jul 2016
Location: Fairmont, WV
Posts: 1,558
|
Quote:
__________________
|
|
07-12-2020, 03:24 PM | #198 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,722
|
One more thing to add, that I noticed when I did mine, the rubber bushings are installed from the bottom and are tight against the frame. I installed the lower bushings first to copy the original setup (also what the instructions indicated).
__________________
|
10-23-2020, 10:46 PM | #199 |
Drives: none Join Date: Jan 2019
Location: Northern VA
Posts: 119
|
sorry to necro-thread but
1) did GM just copy/paste the Gen5 bushings even though the Gen6 bushing cup is shorter? Why not toss the pucks into a lathe and cut them shorter so both sit flush on their edges? 2) how is it that we STILL not have the actual spring rates of the ZL1 vs DSSV setup? 3) DSSV "doing great" at triple digits and 'wallow' simply suggests their rebound damping is super high and so their slow compression. And given how lousy they apparently are at street speeds and square edged bumps their high-speed compression circuit is wildly inappropriate (restrictive) for that use case. And yet the DSSV has an off-road truck application so clearly they are capable of designing a compression circuit that passes a metric ton of fluid at high rates - they just chose not to. Why has nobody asked for different pistons? 4) has nobody just swapped springs for a more sane rate? I realize 3" ID springs are not super-common but a simple adapter can let you run 2.5" which are as common as sand particles. 5) has nobody taken their shocks to a dyno and logged their force response curves? I have an appointment to drive a ZLE on public streets to log my own first-hand observations. Last time I did that was 2 years ago but the drive was fairly limited but didn't seem outrageous. Then again that very same car has had 4 owners in the span of 2 years and it up for sale again! |
11-10-2020, 01:42 PM | #200 | |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,830
|
Quote:
john powell has a set of these hit him up he has done alot of testing on the stock dssv shocks
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
|
11-12-2020, 12:49 PM | #201 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,830
|
found a kit in stock but shop quoted me 5 hours lol **** me
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-15-2020, 01:24 PM | #202 | |
Drives: 2018 ZLE Join Date: Jul 2014
Location: Ontario, Canada
Posts: 580
|
Quote:
|
|
|
|
Post Reply
|
|
|