12-27-2014, 11:08 AM | #29 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
FINALLY
starting to put the bottom end together
__________________
|
12-27-2014, 02:38 PM | #30 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
I'm Jelly!!!!!!!!!!!!!!
__________________
|
01-06-2015, 02:59 PM | #31 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
Going in!
we are putting the engine in the car today
it made just over 600hp on the engine dyno last night it makes a lot more power earlier, just what we wanted. hope to have it on the chassis dyno tonight, but probably won't happen until tomorrow i'm stoked!
__________________
|
01-06-2015, 03:11 PM | #32 |
Cone Killer
Drives: 2012 SS Join Date: Dec 2013
Location: St. Albans, West Virginia
Posts: 832
|
Oh man, I'm pumped to see what it puts to the wheels. Should be a blast
__________________
2012 Camaro SS - Sold
Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out! |
01-07-2015, 09:52 AM | #33 |
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
600hp on the engine dyno is typically about 520rwhp depending on what all accessories you were running on the engine dyno.
Typically we see about 570hp with a cam only LS3. 600-615 on heads cam LS3 & up to 675hp with a 418 TSP LS3 if you get crazy! That thing will be a blast with the extra cubes! |
01-07-2015, 09:54 AM | #34 |
Drives: Florida Speed & Power Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,185
|
Congrats bud, Glad to see this thing coming together!
|
01-07-2015, 11:08 AM | #35 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
me too!
murphy ate our lunch last night and again this morning. now the clutch is shot, pulling it out and getting a mc leod rst overnighted. we can not buy a break............... oh well, on the positive side, this should make things solid
__________________
|
01-10-2015, 11:49 AM | #36 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
dyno sheet
engine dyno sheet
what we wanted, this will be fun
__________________
|
01-10-2015, 12:46 PM | #37 |
Drives: 1989 GTA Trans Am Join Date: Jun 2012
Location: Cypress, California
Posts: 610
|
Very nice. Plenty of torque down low. By the way what are the specifications on your new camshaft?
|
01-10-2015, 02:45 PM | #38 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
BTR grind: 225/238, 612/586 113
__________________
|
01-10-2015, 04:27 PM | #39 |
Drives: 1989 GTA Trans Am Join Date: Jun 2012
Location: Cypress, California
Posts: 610
|
Interesting and you still made peak power around 6200 rpm.
|
01-10-2015, 06:26 PM | #40 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
Brian is the man for cams & Seth is the guy to put it together
Now for the tune...........it takes all the pieces
__________________
|
01-11-2015, 04:29 PM | #41 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
assy pics
I got these from Seth last night
__________________
|
01-11-2015, 04:36 PM | #42 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
When is it getting dyno'd
__________________
|
|
|
|
|