[sureshshanmugam79]

Plasti dipped the tail lights and masked the chrome in the front grill

[FLTRCamaro]

Did a custom hood wrap today 🙂

[F1FTY]

Drove it. Love this car.

[jlagman]

Originally Posted by JDono

Yeahhhh

If it makes you feel better, I rashed pretty recently too and the local hardware store doesn't have anything finer than 220 grit.

[warriordave927]

Hey sureshshanmugam what did you use on the chrome accents,plastidip? Did you do it on the car or did you take them of to spray

[sureshshanmugam79]

Originally Posted by warriordave927

Hey sureshshanmugam what did you use on the chrome accents,plastidip? Did you do it on the car or did you take them of to spray

Hello Dave,

I used the Blackout tape. Used the heat gun to bend it in the corners and cut to shape. Did not remove it.

[greaser2]

Black taillights, 3rd brake light and reflectors added.

[MyneS]

After letting the Skorpion hood cure for a few weeks, I finally got Cquartz applied and man does it Shine!

[sureshshanmugam79]

5mm Wheel spacers added. Noticeable :-)
underhood dressing

[soloknight6]

Originally Posted by greaser2

Black taillights, 3rd brake light and reflectors added.

The green looks so good on these cars. My favorite color next to red hot. How did your third brake light fit? Mine doesn't sit as flush as the original red one.

[greaser2]

Originally Posted by soloknight6

The green looks so good on these cars. My favorite color next to red hot. How did your third brake light fit? Mine doesn't sit as flush as the original red one.

Fits is fine. Had to remove the factory gasket which took a little effort.

[Tazz3069]

I installed my GM Rear Diffuser. Now to get the side skirts, front splitter and new wing painted.

[HYPER1LE]

My 2017 SS 1LE in Hyper Blue Metallic (HBM) came with these options:

1. PDR
2. Suede knee bolsters
3. 1LE hash mark

Thus far, I have added:

1. Window tint (front 55%, sides, 35%, rear 20%)
2. Xpel protective film (front fascia, front fenders, leading roof, a-pillars, rocker panels)
3. Premium rock guards (from ZL1Addons)
4. Custom painted engine cover/fuel rails (HBM fuel rails with black plenum by River City Creations)
5. Door striker plates (HBM by River City Creations)
6. Defroster vents (black w/ HBM trim by River City Creations)
7. GM LT1 6.2L Cold Air Intake w/ factory tune (installed by Carl Black in Kennesaw)
8. GM Camaro 1LE wicker bill (installed by Carl Black in Kennesaw)
9. GM Camaro lighted door sill plaques (installed by Carl Black in Kennesaw)
10. GM sport pedals (installed by Carl Black in Kennesaw)
11. GM Camaro door trim in HBM (installed by Carl Black in Kennesaw)
12. GM 1LE premium floor mats
13. GM Camaro all-weather trunk mat
14. GM smoked tail lights
15. GM smoked CHMSL (3rd brake light) (installed by Carl Black in Kennesaw)
16. Oracle HBM color-match and tinted LED side markers
17. Custom-painted, Chevrolet emblem, wheel center caps, black w/ HBM outline (by River City Creations)
18. Camaro Chief Engineer Alan Oppenheiser's signature (obtained at CamaroFest 2017)

Coming soon:

1. Custom painted GM strut tower brace
2. Custom painted fuel door
3. Custom painted "Fifty" badge in HBM (thinking dash placement - not sure yet)
4. GM carbon fiber dash panel
5. Custom-painted billet interior control knobs, set of 8, in HBM
6. Custom-painted center console trim in HBM
7. Custom-painted billet engine and strut tower caps in HBM
8. Custom-painted engine bay shroud (3-piece) in HBM
9. 1LE decal for strut tower brace (unless I have it custom-painted w/ brace)
10. MRR M716 19" (ZL1 1LE-style replica) wheels
11. Michelin Pilot Sport A/S 3+ ASY ZP tires, 285/35ZR19 (99Y) - all-season set-up for winter use (will continue to use OEM for spring through fall)
12. May have hood re-wrapped in satin black with ghosted 1LE designation as others have done. Great look to those who have done it by the way!
13. Custom-painted Chevrolet badges, front and rear ("transformer"-style, black w/ HBM outline by River City Creations) - to match center caps and overall appearance theme
14. GM OEM SEMA grille w/ HBM accents

*NOTE: Power mods will come in the future once the warranty runs out, or when I lose patience, whichever occurs first! In the meantime, I am keeping myself distracted with appearance mods. What I am considering:

1. Supercharger (undecided what brand but won't be ProCharger - personal preference)
2. Kooks long-tube headers w/ high-flow cats (will keep OEM NPP)
3. Heads/cam package
4. Tune

[craigss50]

Sprayed front headlights with Mcguairs headlight protection.