08-16-2017, 02:17 PM | #1 |
Drives: 2016 2ss Join Date: Jan 2017
Location: Dayton Ohio
Posts: 118
|
Lowered car with 10 inch wide wheels tires size
Lowered car with 10 inch wide wheels tires size. Running the MRR228 Wheels 20 x 9 front 20 x 10 rear. I'm wanting to go with a drag radial set up for the rear and wanting to make sure they won't rub. What size tire should I be looking for? Car is lowered with AFE lowering springs 1.25 inches front 1.5 inches rear. It's a non-MRC car. Thanks in advance.
|
08-21-2017, 05:58 AM | #2 |
Drives: '16 Camaro 2SS & '15 Durango R/T Join Date: Jul 2016
Location: Rochester, NY
Posts: 505
|
I have the M228 wheel but in 10" front & 11" rear. I was originally running 285/30/20 front & 305/30/20 rear with Pilot Super Sports. After all the performance mods, I needed something to handle the power better--I just recently moved the wiring harness in the rear wheelwell and put on 305/35/20 Mickey Thompson ET S/S. I'm lowered 1.1" with the Eibach Pro Kit and no rubbing so far. Car hooks great from a roll but those drag radials definitely drive different than the Super Sports.
__________________
'16 2SS: Summit White/Adrenaline Red/A8/Whipple Supercharger/ARH Longtube Headers/Corsa Xtreme Exhaust/Roto-Fab Cold Air Intake/Eibach Pro Kit/M228 Wheels/Lots of GM Accessories
|
08-21-2017, 06:35 AM | #3 |
Drives: 2017 Camaro 2SS Join Date: Dec 2016
Location: Houston
Posts: 469
|
Thanks Cooden! This is exactly the answer I was needing.
Looking to go with M017 MMR wheels and the same 305 30 20 rears. No need to go with your newly upgraded drag radials as I am still stock. |
08-21-2017, 07:15 AM | #4 |
|
looks good, but bumps and rear passengers will scrape the edge of those tires.
|
08-21-2017, 01:16 PM | #5 | |
Drives: '16 Camaro 2SS & '15 Durango R/T Join Date: Jul 2016
Location: Rochester, NY
Posts: 505
|
Quote:
Bumps? I've been checking the tires over for 3 days--nothing is hitting the edge so far.
__________________
'16 2SS: Summit White/Adrenaline Red/A8/Whipple Supercharger/ARH Longtube Headers/Corsa Xtreme Exhaust/Roto-Fab Cold Air Intake/Eibach Pro Kit/M228 Wheels/Lots of GM Accessories
|
|
08-21-2017, 01:20 PM | #6 |
Drives: 2017 Chevrolet SS 1LE Join Date: Oct 2016
Location: Los Angeles, California
Posts: 9,270
|
The rubbing does not occur on the fender but on the inside of the fender linear
|
|
|
Post Reply
|
|
|