06-17-2017, 09:30 AM | #1 |
Drives: 2016 2LT vert 2.0 R/S A8 Join Date: Apr 2017
Location: oklahoma
Posts: 106
|
Back from dealer, not happy
Took the car in for paint and rattle issues. Got it back with those issues fixed but ended up with more problems. Now I have a loud clunking noise in the back when I hit bumps, boost gauge is jumpy, oil gauge now gets up to almost 80 psi when I accelerate to highway speeds and my outside temp is stuck at 82 degrees. Is there any way to reset the DIC or mylink before I take it back?
|
06-17-2017, 03:31 PM | #2 |
Drives: Traded in 2016 BLUE VELVET 2LT RS Join Date: Aug 2016
Location: Woodstock GA
Posts: 262
|
Unhook the battery for 30 minutes, good luck..
|
06-19-2017, 07:02 PM | #3 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
The outside temp gauge takes a bit before it will read correctly again if the battery was unplugged or if the dealer flashed a new calibration into the system.
|
|
|
Post Reply
|
|
|