exhaust help - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ev_santillano · 07-20-2016, 07:44 PM

I decided to go for a resonated x pipe and muffler delete set up for my exhaust but I was wondering how deleting the factory resonators and going with 2.5 in piping from the x pipe back would sound. Anyone have any suggestions or sound clips? I am also planning on adding Solos high flow resonated cats down the line and i'm wondering how those would sound with this setup i'm going with. Any advice is greatly appreciated.

ev_santillano · 07-20-2016, 08:05 PM

Nice. The x pipe just got in today and Im going to my exhaust guy tomorrow to get the work done. I figured this would be the best route to go for the money. If for whatever reason It doesn't turn out the way I hope and I don't like the sound could I just add an aftermarket muffler to clean up the sound? I really doubt I will have to but Id like to have an easy fix just in case.

Kenny Camaro · 07-20-2016, 08:07 PM

Sage advise, from the oracle.

ev_santillano · 07-20-2016, 08:23 PM

Ya I just wanted to post on here to get some last minute opinions and advice. I will definitely be deleting the resonators and going with bigger pipes. Hopefully Ill get those cats soon.

MARVIL · 07-21-2016, 01:37 AM

Wish I had videos...I went with high flow cats, x-pipe, MRT v1. Sounds great without major droning as well.

MARVIL · 07-21-2016, 01:48 AM

Quote:

Originally Posted by Sanjay Collins

Yeah, that'd basically sound the same since the MRT v1 is just a pair of AR25 resonators.

What happened to the Cammy Sanjay?

Smdh. Ford huh? = /

MARVIL · 07-21-2016, 01:50 AM

Quote:

Originally Posted by Sanjay Collins

Yeah, that'd basically sound the same since the MRT v1 is just a pair of AR25 resonators.

I'm just going to leave this right here.

https://youtu.be/_2Z4PHH1Mzo

Lmao.

MARVIL · 07-21-2016, 01:57 AM

No shit huh. Lmmfao.

Well glad to still see you around here. I took some time off from here. Getting too many ideas and spending too much $$$ making these ideas happen. Lol.

MARVIL · 07-22-2016, 12:16 AM

Quote:

Originally Posted by Sanjay Collins

Hahahaha.

Thanks, man. Yeah, I haven't seen you in a long time. What do you have planned?

Turbos! Lol. Looking at turbos.

MARVIL · 07-22-2016, 07:16 AM

Well no shit. I just want more power. It's like once you've plateaued..... on to the next stage. Smdh. This is a bad habit.

07-20-2016, 07:44 PM	#1
ev_santillano Drives: 2017 1SS Camaro Join Date: Jul 2016 Location: McFarland California Posts: 51	exhaust help I decided to go for a resonated x pipe and muffler delete set up for my exhaust but I was wondering how deleting the factory resonators and going with 2.5 in piping from the x pipe back would sound. Anyone have any suggestions or sound clips? I am also planning on adding Solos high flow resonated cats down the line and i'm wondering how those would sound with this setup i'm going with. Any advice is greatly appreciated.

07-21-2016, 01:37 AM	#5
MARVIL Drives: 2014 Camaro V6 RS Join Date: Oct 2015 Location: Houston Posts: 190 View My Garage	Wish I had videos...I went with high flow cats, x-pipe, MRT v1. Sounds great without major droning as well. __________________ GMPP body kit / 1.5" drop Phastek springs / Blacked out factory rims / Nitto Motivo tires / Blacked out exhaust tips / RPI carbon fiber hydropainted emblems / MGP RS caliper covers / BMR strut bar / Apex CAI scoop / VMAX ported throttle body / CAI cold air intake / Elite Engineering Oil catch can / Solo Performance high flow cats / MagnaFlow Tru-X X pipe / MRT v1

07-21-2016, 01:57 AM	#8
MARVIL Drives: 2014 Camaro V6 RS Join Date: Oct 2015 Location: Houston Posts: 190 View My Garage	No shit huh. Lmmfao. Well glad to still see you around here. I took some time off from here. Getting too many ideas and spending too much $$$ making these ideas happen. Lol. __________________ GMPP body kit / 1.5" drop Phastek springs / Blacked out factory rims / Nitto Motivo tires / Blacked out exhaust tips / RPI carbon fiber hydropainted emblems / MGP RS caliper covers / BMR strut bar / Apex CAI scoop / VMAX ported throttle body / CAI cold air intake / Elite Engineering Oil catch can / Solo Performance high flow cats / MagnaFlow Tru-X X pipe / MRT v1

07-22-2016, 07:16 AM	#10
MARVIL Drives: 2014 Camaro V6 RS Join Date: Oct 2015 Location: Houston Posts: 190 View My Garage	Well no shit. I just want more power. It's like once you've plateaued..... on to the next stage. Smdh. This is a bad habit. __________________ GMPP body kit / 1.5" drop Phastek springs / Blacked out factory rims / Nitto Motivo tires / Blacked out exhaust tips / RPI carbon fiber hydropainted emblems / MGP RS caliper covers / BMR strut bar / Apex CAI scoop / VMAX ported throttle body / CAI cold air intake / Elite Engineering Oil catch can / Solo Performance high flow cats / MagnaFlow Tru-X X pipe / MRT v1

07-20-2016, 08:05 PM	#2
ev_santillano Drives: 2017 1SS Camaro Join Date: Jul 2016 Location: McFarland California Posts: 51	Nice. The x pipe just got in today and Im going to my exhaust guy tomorrow to get the work done. I figured this would be the best route to go for the money. If for whatever reason It doesn't turn out the way I hope and I don't like the sound could I just add an aftermarket muffler to clean up the sound? I really doubt I will have to but Id like to have an easy fix just in case.

07-20-2016, 08:07 PM	#3
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	Sage advise, from the oracle.

07-20-2016, 08:23 PM	#4
ev_santillano Drives: 2017 1SS Camaro Join Date: Jul 2016 Location: McFarland California Posts: 51	Ya I just wanted to post on here to get some last minute opinions and advice. I will definitely be deleting the resonators and going with bigger pipes. Hopefully Ill get those cats soon.