Huston, we have a problem.....with the rear vision camera

jimbogen4 · 05-27-2016, 07:06 AM

Jumped in, started it up, put it in reverse....and then..........

MiamiBlueCamaro · 05-27-2016, 07:12 AM

Try this!

sonnydurden · 06-01-2016, 02:49 AM

One night mine did that. Woke up in the morning to go to work and it was gone. Hasn't come back yet.

IrishShadow · 06-01-2016, 12:46 PM

Quote:

Originally Posted by sonnydurden

One night mine did that. Woke up in the morning to go to work and it was gone. Hasn't come back yet.

Same here

Emoto · 06-01-2016, 04:22 PM

Looks like the Lysergic setting.

jimbogen4 · 06-02-2016, 09:06 AM

Shop said it was a blown fuse....but I checked both Camera fuses. I don't know....it works now....

BlkReaper · 06-03-2016, 05:58 PM

Houston

I'm sorry

andrec10 · 06-04-2016, 07:39 AM

Quote:

Originally Posted by BlkReaper

Houston

I'm sorry

You beat me to it!

ctrlz · 06-08-2016, 06:59 AM

This problem is called solarization. It usually means a bad LCD panel or T-con board. The T-con is probably not a separate board in this application. So, main board then, which, again, is probably not separately serviceable in this application.
And while we are being anal... the actual Lovell quote from 13 is "Houston, we've HAD a problem."

EDIT: I should add that an intermittent problem like this is often due to a poor connection like a cold solder joint on a surface mount device. The behavior can vary with temperature and vehicle vibration. It is not going to repair itself. I would document with photos and ask to have the display module replaced. At this point you are likely to get a brand new unit. After a few years warranty replacement will get you a unit refurbed by AC Delco or whoever is supplying these. We are so early in the model run they probably don't have units to recycle at this point.

jimbogen4 · 08-14-2016, 09:09 AM

It's over 90* out and the temp is showing anywhere between 64* and the actual temp.

vet757 · 08-14-2016, 09:35 AM

Quote:

Originally Posted by jimbogen4

It's over 90* out and the temp is showing anywhere between 64* and the actual temp.

Thats weird Im in hampton roads VA(chesapeake) and havent had any of this issues....yet. I did have a weird glitch for a few minutes where the HVAC display setting wouldnt show on the display. Did you have the Mylink update done?

jimbogen4 · 08-16-2016, 04:27 PM

Im here in Chesapeake as well.....and yes....about 2 months ago.....

05-27-2016, 07:06 AM	#1
jimbogen4 Drives: 16 2LT, 99 Z28 Convertible Join Date: Mar 2012 Location: Washington D.C. Posts: 19 View My Garage	Huston, we have a problem.....with the rear vision camera Jumped in, started it up, put it in reverse....and then.......... Attached Images __________________ 2016 2LT Nightfall Gray V6 Auto Adrenaline Red Interior RS Package Light/Mem Package NPP Nav Sunroof 20% tint

05-27-2016, 07:12 AM	#2
MiamiBlueCamaro Drives: Gen 6 Camaro RS Join Date: Dec 2015 Location: Miami FL Posts: 1,725	Try this! Attached Images

06-01-2016, 04:22 PM	#5
Emoto Sure, why not? Drives: 2016 Camaro 2SS, Jeep JKU Rubicon Join Date: Mar 2015 Location: SE Mass Posts: 1,538	Looks like the Lysergic setting. __________________ This is that witty and clever statement that makes you chuckle.

06-02-2016, 09:06 AM	#6
jimbogen4 Drives: 16 2LT, 99 Z28 Convertible Join Date: Mar 2012 Location: Washington D.C. Posts: 19 View My Garage	Shop said it was a blown fuse....but I checked both Camera fuses. I don't know....it works now.... __________________ 2016 2LT Nightfall Gray V6 Auto Adrenaline Red Interior RS Package Light/Mem Package NPP Nav Sunroof 20% tint

06-08-2016, 06:59 AM	#9
ctrlz Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016 Location: Ocean City, NJ Posts: 3,226	This problem is called solarization. It usually means a bad LCD panel or T-con board. The T-con is probably not a separate board in this application. So, main board then, which, again, is probably not separately serviceable in this application. And while we are being anal... the actual Lovell quote from 13 is "Houston, we've HAD a problem." EDIT: I should add that an intermittent problem like this is often due to a poor connection like a cold solder joint on a surface mount device. The behavior can vary with temperature and vehicle vibration. It is not going to repair itself. I would document with photos and ask to have the display module replaced. At this point you are likely to get a brand new unit. After a few years warranty replacement will get you a unit refurbed by AC Delco or whoever is supplying these. We are so early in the model run they probably don't have units to recycle at this point. Last edited by ctrlz; 06-08-2016 at 09:16 AM.

06-01-2016, 02:49 AM	#3
sonnydurden Drives: ‘16 1SS & ‘19 1LT Join Date: Aug 2012 Location: Windermere, FL Posts: 2,086	One night mine did that. Woke up in the morning to go to work and it was gone. Hasn't come back yet.

06-03-2016, 05:58 PM	#7
BlkReaper Drives: 2016 2ss Join Date: Aug 2015 Location: Phoeinx, AZ Posts: 139	Houston I'm sorry

08-14-2016, 09:09 AM	#10
jimbogen4 Drives: 16 2LT, 99 Z28 Convertible Join Date: Mar 2012 Location: Washington D.C. Posts: 19 View My Garage	Now the outside temp is all over the place. It's over 90* out and the temp is showing anywhere between 64* and the actual temp. __________________ 2016 2LT Nightfall Gray V6 Auto Adrenaline Red Interior RS Package Light/Mem Package NPP Nav Sunroof 20% tint

08-16-2016, 04:27 PM	#12
jimbogen4 Drives: 16 2LT, 99 Z28 Convertible Join Date: Mar 2012 Location: Washington D.C. Posts: 19 View My Garage	Im here in Chesapeake as well.....and yes....about 2 months ago..... __________________ 2016 2LT Nightfall Gray V6 Auto Adrenaline Red Interior RS Package Light/Mem Package NPP Nav Sunroof 20% tint

User Name		Remember Me?
Password