Phastek Performance 2016 Camaro 1SS - Page 4

moonrider · 02-18-2016, 12:04 PM

So stock there's about a 2" gap?

Jkenn111 · 02-18-2016, 12:18 PM

Gonna look good!

MIAMI2SSRS · 02-18-2016, 01:06 PM

Ricardo@Phastek · 02-19-2016, 04:47 PM

Here they are installed!!

The FIRST2016 Camaro SS with lowering springs!!

The car rides great!! The car handles great, no rubbing issues, feels stiffer in turns, goes over bumps very well. The car only has 205 miles on the clock, we have not driven the car a whole lot with the springs so they might need to settle a bit more. The car will be driven this weekend and we will measure again at the start of the new week. We will keep everyone up to date one availability once they become available.

Details on springs to come. Install video to come as well!!

laynlo15 · 02-19-2016, 06:43 PM

I'm ready for a set, are the BMR, Eibach? Send me a set.

BradfordCamaro · 02-19-2016, 07:49 PM

Looks pretty good. I would have concerns with rubbing with all these wide wheel set-up that push the tire out 18 - 20mm.

So I will have to try some too

laynlo15 · 02-19-2016, 09:28 PM

That's why you want to drop it first and figure what wheel offset and tire/wheel combo will fit. I'd rather have less tire/wheel and have it tucked instead of having a tire that sticks out past the lip and your stuck there. Car will most always handle better with a lower stance, just the laws of loweredness. ha

MIAMI2SSRS · 02-19-2016, 09:43 PM

Wow. What a difference. It looks really good!!!

Now, we need a kit for the MRC equipped cars

LSxWittles · 02-19-2016, 09:53 PM

Very nice, looks great! I'm wondering who will be the first to come out with some coilovers for the 6th gen. That 1.5 inch drop looks great and I believe it will look even better once the springs settle. Wondering how much the handling will be improved by this drop as well.

Ricardo@Phastek · 02-22-2016, 08:53 AM

Quote:

Originally Posted by laynlo15

I'm ready for a set, are the BMR, Eibach? Send me a set.

Not BMR or Eibach. They are a house brand, we work with a manufacturer that is willing to allow us to put our name on the set.

Quote:

Originally Posted by MIAMI2SSRS

Wow. What a difference. It looks really good!!!

Now, we need a kit for the MRC equipped cars

Should have an MRC car hopefully soon so we can get some testing to see how it will work.

Quote:

Originally Posted by LSxWittles

Very nice, looks great! I'm wondering who will be the first to come out with some coilovers for the 6th gen. That 1.5 inch drop looks great and I believe it will look even better once the springs settle. Wondering how much the handling will be improved by this drop as well.

Drove the car yesterday through some back roads and it was fun. I have taken those same roads on a motorcycle and the speed I was able to carry through the turn felt great and the car stuck.

crankaholic · 02-22-2016, 12:45 PM

Looks great. I'd love a 1" drop MRC option

showstopper · 02-22-2016, 12:57 PM

The stance is perfect. Love it.

Sent from my SM-G900T using Tapatalk

MIAMI2SSRS · 02-22-2016, 01:18 PM

Quote:

Originally Posted by Ricardo@Phastek

Not BMR or Eibach. They are a house brand, we work with a manufacturer that is willing to allow us to put our name on the set.

Should have an MRC car hopefully soon so we can get some testing to see how it will work.

Drove the car yesterday through some back roads and it was fun. I have taken those same roads on a motorcycle and the speed I was able to carry through the turn felt great and the car stuck.

Thanks for the info on the MRC set. Looking forward to see it.

MemBluff23 · 02-22-2016, 01:27 PM

Quote:

Originally Posted by showstopper

The stance is perfect. Love it.

Sent from my SM-G900T using Tapatalk

+1

02-18-2016, 01:06 PM	#45
MIAMI2SSRS Drives: 2016 Black 1SS Camaro Join Date: Jul 2012 Location: Miami Posts: 561	__________________ 2016 Camaro 1SS M6 with MRC and NPP. “Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.” Albert Einstein

02-19-2016, 04:47 PM	#46
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428	Here they are installed!! The FIRST2016 Camaro SS with lowering springs!! The car rides great!! The car handles great, no rubbing issues, feels stiffer in turns, goes over bumps very well. The car only has 205 miles on the clock, we have not driven the car a whole lot with the springs so they might need to settle a bit more. The car will be driven this weekend and we will measure again at the start of the new week. We will keep everyone up to date one availability once they become available. Details on springs to come. Install video to come as well!! Last edited by Ricardo@Phastek; 02-19-2016 at 04:59 PM.

02-19-2016, 06:43 PM	#47
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,862	I'm ready for a set, are the BMR, Eibach? Send me a set. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-19-2016, 07:49 PM	#48
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Looks pretty good. I would have concerns with rubbing with all these wide wheel set-up that push the tire out 18 - 20mm. So I will have to try some too __________________ Last edited by BradfordCamaro; 02-19-2016 at 08:28 PM.

02-19-2016, 09:28 PM	#49
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,862	That's why you want to drop it first and figure what wheel offset and tire/wheel combo will fit. I'd rather have less tire/wheel and have it tucked instead of having a tire that sticks out past the lip and your stuck there. Car will most always handle better with a lower stance, just the laws of loweredness. ha __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-18-2016, 12:04 PM	#43
moonrider Drives: 2016 2SS Join Date: Nov 2015 Location: Moon Township, PA Posts: 474	So stock there's about a 2" gap?

02-18-2016, 12:18 PM	#44
Jkenn111 Drives: Beautiful Join Date: Jan 2016 Location: Nw Fl Posts: 6	Gonna look good!

02-19-2016, 09:43 PM	#50
MIAMI2SSRS Drives: 2016 Black 1SS Camaro Join Date: Jul 2012 Location: Miami Posts: 561	Wow. What a difference. It looks really good!!! Now, we need a kit for the MRC equipped cars __________________ 2016 Camaro 1SS M6 with MRC and NPP. “Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.” Albert Einstein

02-19-2016, 09:53 PM	#51
LSxWittles Drives: Stuff and Things Join Date: Apr 2015 Location: United States Posts: 257	Very nice, looks great! I'm wondering who will be the first to come out with some coilovers for the 6th gen. That 1.5 inch drop looks great and I believe it will look even better once the springs settle. Wondering how much the handling will be improved by this drop as well.

02-22-2016, 12:45 PM	#53
crankaholic Drives: 2016 Camaro 2SS Join Date: Dec 2015 Location: Philadelphia Posts: 771	Looks great. I'd love a 1" drop MRC option __________________

02-22-2016, 12:57 PM	#54
showstopper Drives: 2010 RS/SS Join Date: Jul 2009 Location: USA Posts: 3,442	The stance is perfect. Love it. Sent from my SM-G900T using Tapatalk

User Name		Remember Me?
Password