anybody go 3400 6/4 have VIN..? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

carguy · 06-14-2009, 07:57 AM

Just wondering if anybody that went 3400 on 6/4 or later has gottena VIN# yet ?

By my calculations they should have been built by now. Just wanna know
If I got QC'd or if I am still on the slow road to .....?

Thanks.....Just wonder'n

Update...1 800-USE - Less says I'm at 3800!

2g1ft1ewxa9118254 rolled off the line on sat in final inspection now

They wouldn't give me any other info other than "there ordering dept would be working with my dealer to work out an ETA"

Again...It is 1 800 use less.

but it gives me hope!

Z16 · 06-14-2009, 08:11 AM

I also went to 3400 on the 4th of june have not heard anything yet

gtjacket · 06-14-2009, 08:15 AM

3400 here also and no VIN. I have seen some guys that went t0 3400 on 6/5 get Vins. I am clueless to this whole process. I have a feeling that 6/4 cars were built yesterday but just not updated yet (fingers crossed).

RollTide · 06-14-2009, 08:24 AM

I went 3400 on 6/3 and have heard nothing
I'm sure it has been built by now.
Don't worry about updating the status
JUST SHIP IT.

Z16 · 06-14-2009, 08:27 AM

I also think we were built friday or saturday.Should hear soon.

Chief00 · 06-14-2009, 08:31 AM

I went 3400 on 6/3. Spoke with my saleman yesterday and no change. I'm hoping that Saturdays shift put me at 3800. My salesman is calling me Monday with an update.

2010SSRS · 06-14-2009, 08:46 AM

my buddies order went 3400 that week and as of yesterday...........is still at 3400!

what gives? usually a week from 3400 to 3800.............

carguy · 06-14-2009, 08:48 AM

I am hoping to hear its been shipped on Monday. My dealer said his workbench hadn't been updated all week usually on thurs or Fri. But he hadn't had any updates all week.

Looks like we are all in the same boat....hopefully all good news Monday!

AZ2010SS · 06-14-2009, 09:32 AM

3400 on 6/2 and I have a VIN. See my sig.

JayhawkSS · 06-14-2009, 09:36 AM

Same here! I called the dealer expecting a VIN# on Friday.
According to other member's timelines we should have had it by now.

fireresq157 · 06-14-2009, 09:45 AM

Yes!

Ltdodge · 06-14-2009, 10:22 AM

i got my vin....

domano 68 · 06-14-2009, 10:28 AM

Yup, I went 3400 on 6/4 and as of yesterday morning I was still at 3400. I am expecting all of us were built yesterday and the system was not updated. Yesterday was the first day of overtime so I am sure a lot of cars moved. If these were not built yesterday then I would think by mid-week, we should be built for sure.

If we call our dealerships tomorrow, will they know if we were built yesterday? I am asking because I keep reading here and there that the dealerships Workbench is updated every Thursday.

JayhawkSS · 06-14-2009, 10:33 AM

So if its built early this week...when are you guys expecting delivery?

06-14-2009, 07:57 AM	#1
carguy Carguy Drives: 57Chevy,67,80,2@10's camaro's,04SSR Join Date: Jan 2009 Location: Freeport,IL Posts: 544	anybody go 3400 6/4 have VIN..? Update ! Just wondering if anybody that went 3400 on 6/4 or later has gottena VIN# yet ? By my calculations they should have been built by now. Just wanna know If I got QC'd or if I am still on the slow road to .....? Thanks.....Just wonder'n Update...1 800-USE - Less says I'm at 3800! 2g1ft1ewxa9118254 rolled off the line on sat in final inspection now They wouldn't give me any other info other than "there ordering dept would be working with my dealer to work out an ETA" Again...It is 1 800 use less. but it gives me hope! __________________ 2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit. .................................................. .............................. Last edited by carguy; 06-15-2009 at 10:56 AM.

06-14-2009, 08:15 AM	#3
gtjacket 2G1FT1EW0A9118618 Drives: 2010 Camaro 2SS Black/IOM M6 Join Date: Dec 2008 Location: Florence, KY Posts: 550 View My Garage	3400 here also and no VIN. I have seen some guys that went t0 3400 on 6/5 get Vins. I am clueless to this whole process. I have a feeling that 6/4 cars were built yesterday but just not updated yet (fingers crossed). __________________ 1100, Preliminary order accepted 12/5 2000, Order accepted by GM 05/05 3000, Order accepted by production control 05/05 3400, Order broadcast 6/4 3800, Order produced 6/15 4000, Available to ship 6/16 4104, Bailment Invoice 4200, Shipped 6/19 6000, Delivered to the customer 6/25 2SS/RS BLK M6 GFX IOM interior

06-14-2009, 08:46 AM	#7
2010SSRS Drives: 2000 Silverado Join Date: Apr 2009 Location: Southern WI Posts: 1,241	my buddies order went 3400 that week and as of yesterday...........is still at 3400! what gives? usually a week from 3400 to 3800............. __________________ IOM 2SSRS LS3 R6P - VIN 7553 Delivered 5/22/2009 Kooks, Corsa and Roto-Fab - SOLD 9/2010 VR 2SSRS LS3 - Borla, SLP CAI

06-14-2009, 08:48 AM	#8
carguy Carguy Drives: 57Chevy,67,80,2@10's camaro's,04SSR Join Date: Jan 2009 Location: Freeport,IL Posts: 544	I am hoping to hear its been shipped on Monday. My dealer said his workbench hadn't been updated all week usually on thurs or Fri. But he hadn't had any updates all week. Looks like we are all in the same boat....hopefully all good news Monday! __________________ 2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit. .................................................. ..............................

06-14-2009, 09:32 AM	#9
AZ2010SS 2G1FT1EW5A9116928 Drives: 2010 2SS/RS LS3 Camaro Join Date: Apr 2009 Location: Phx AZ Posts: 142 View My Garage	3400 on 6/2 and I have a VIN. See my sig. __________________

06-14-2009, 08:11 AM	#2
Z16 Drives: 1ss Join Date: May 2009 Location: ma Posts: 41	I also went to 3400 on the 4th of june have not heard anything yet

06-14-2009, 08:24 AM	#4
RollTide Drives: 97 Bonneville SSE Join Date: Apr 2009 Location: Suwanee, Ga Posts: 90	I went 3400 on 6/3 and have heard nothing I'm sure it has been built by now. Don't worry about updating the status JUST SHIP IT.

06-14-2009, 08:27 AM	#5
Z16 Drives: 1ss Join Date: May 2009 Location: ma Posts: 41	I also think we were built friday or saturday.Should hear soon.

06-14-2009, 08:31 AM	#6
Chief00 Drives: 2010 2LT/RS CGM Join Date: Mar 2009 Location: Royersford, Pa Posts: 46	I went 3400 on 6/3. Spoke with my saleman yesterday and no change. I'm hoping that Saturdays shift put me at 3800. My salesman is calling me Monday with an update.

06-14-2009, 09:36 AM	#10
JayhawkSS Autobot Drives: 2010 Camaro 2SS/RS Join Date: Jan 2009 Location: Overland Park, KS Posts: 253	Same here! I called the dealer expecting a VIN# on Friday. According to other member's timelines we should have had it by now. __________________ 2010 Camaro 2SS/RS \| *Silver Ice Metallic* LS3..Black Leather..Sunroof - Delivered! 06/27/2009 ROCK CHALK!!!

06-14-2009, 09:45 AM	#11
fireresq157 Drives: 1997 SS & 2010 2SS/RS Join Date: Aug 2006 Location: South Florida Posts: 1,027	Yes!

06-14-2009, 10:22 AM	#12
Ltdodge Drives: 2008 Z06 Join Date: Apr 2009 Location: Oviedo, Florida Posts: 891	i got my vin.... __________________

06-14-2009, 10:28 AM	#13
domano 68 Drives: 2014 1LE Join Date: Sep 2008 Location: SE Posts: 627 View My Garage	Yup, I went 3400 on 6/4 and as of yesterday morning I was still at 3400. I am expecting all of us were built yesterday and the system was not updated. Yesterday was the first day of overtime so I am sure a lot of cars moved. If these were not built yesterday then I would think by mid-week, we should be built for sure. If we call our dealerships tomorrow, will they know if we were built yesterday? I am asking because I keep reading here and there that the dealerships Workbench is updated every Thursday. __________________

06-14-2009, 10:33 AM	#14
JayhawkSS Autobot Drives: 2010 Camaro 2SS/RS Join Date: Jan 2009 Location: Overland Park, KS Posts: 253	So if its built early this week...when are you guys expecting delivery? __________________ 2010 Camaro 2SS/RS \| *Silver Ice Metallic* LS3..Black Leather..Sunroof - Delivered! 06/27/2009 ROCK CHALK!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tracking All Currently Known US VIN and Window Stickers - Order Tracking Thread	UCF w00t	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	4242	02-17-2014 08:57 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 01:00 PM
Got Vin today no TPW ever	RottNCrzy	USA - NY / NJ / PA	5	05-27-2009 05:42 PM
Mine went from 3400 to shipped vin #3714	myblackcamaros	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	21	04-20-2009 02:10 PM
Wow a VIN 2G1FK1EJ9A9103204 3400 for 3 weeks	yesno20102ssblack	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	8	04-15-2009 01:42 PM