DIY part # for ABL (Pictures of Installation included!!!) - Page 66 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

The Stig · 05-05-2012, 08:31 PM

Quote:

Originally Posted by Synergy_9

Thank you so much for the picture. I take it you have already done this mod?

yes.

Synergy_9 · 05-05-2012, 08:33 PM

Once Im ready to do this I might hit you up with some more questions

The Stig · 05-05-2012, 08:41 PM

sounds good

Synergy_9 · 05-06-2012, 12:28 PM

Did you buy door panels from GM like me? And how long did it take you to do this?

The Stig · 05-06-2012, 01:00 PM

Quote:

Originally Posted by Synergy_9

Did you buy door panels from GM like me? And how long did it take you to do this?

I have a 2SS so I already had the door ABL, but I used this thread to do the dash ABL. Took me about an hour and a half to 2 hours the first time. But I was also taking pictures and whatnot.

SteveRS · 05-09-2012, 05:39 AM

Stieger is a very helpful mod... I got 55 days till i get home.. cant wait to get my ABL mod goin!! gotta find someone in VA or Ohio to help me out

DCC1464 · 05-09-2012, 05:52 PM

so my door panels should be here some time this week. i have a 1SS with no plugs for ABL. So do i t-tap the yel/blk on the window switch or the purple wire in the kick panel for door ABL?

Synergy_9 · 05-09-2012, 07:55 PM

DCC1464 im in the same boat as you. I have a 1ss as well. Though I have to wait till next week to do this. From what I understand you tap the purple but I havent been able to try yet. If your able to do this post some pics, I could always use more since I havent tried yet

OHIOSS · 05-09-2012, 08:00 PM

2SSRS- I PM'ed you about a week ago wanting to buy the tubing from you. Can you please advise what I need to do to order this from you?

Thanks Russ

chozn4service · 05-09-2012, 08:30 PM

I just switched my Ice blue ABL to red that I got form sjm. Got the dash tubes and harness as well. Just need to do it now and looking at a video that Tony provided, I need to get some weather strip to put on the dash pieces to hold the tubes in place.
I need someone who has done this to verify the self tapping screw sizes again. I've hear so many type thrown out there.

2SSRS@Gen5diy · 05-09-2012, 08:53 PM

Quote:

Originally Posted by OHIOSS

2SSRS- I PM'ed you about a week ago wanting to buy the tubing from you. Can you please advise what I need to do to order this from you?

Thanks Russ

PM on the way.

camarco · 05-11-2012, 12:28 PM

well just figured i would post some pictures here to acknowledge and thank 2SSRS for doing a great job with my ride sorry it's taken so long Ofer

2SSRS@Gen5diy · 05-11-2012, 12:33 PM

Wow she look's grate, it was fun till you left then i got sick for 3 weeks, but its all good, injoy the car and will see you next year. LOL

camarco · 05-11-2012, 12:51 PM

i forgot to list everything that you did....

so here goes, if i can remember it all

Ofer installed the rearview camera mod, hardwired my radar detector, homelink with green LEDs in the buttons,LEDS in the exterior and interior door handles, LEDs in the door cubbys, under car LEDs, dash ABL, footwell lighting and ran the ABL around the whole door insert...... Did I forget anything, Ofer?

05-05-2012, 08:41 PM	#913
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	sounds good __________________

05-09-2012, 05:39 AM	#916
SteveRS Drives: 2010 SIM Cobalt SS Join Date: Dec 2010 Location: Lorain, Ohio Posts: 6,331	Stieger is a very helpful mod... I got 55 days till i get home.. cant wait to get my ABL mod goin!! gotta find someone in VA or Ohio to help me out __________________ 2011 Imperial Blue 1.5SS 2010 Silver Ice Cobalt SS

05-09-2012, 05:52 PM	#917
DCC1464 COTW 5/27/13 Drives: '11 S/C SS/RS CGM Join Date: Dec 2010 Location: Phoenix, AZ Posts: 755 View My Garage	so my door panels should be here some time this week. i have a 1SS with no plugs for ABL. So do i t-tap the yel/blk on the window switch or the purple wire in the kick panel for door ABL? __________________ 622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread

05-09-2012, 08:30 PM	#920
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	I just switched my Ice blue ABL to red that I got form sjm. Got the dash tubes and harness as well. Just need to do it now and looking at a video that Tony provided, I need to get some weather strip to put on the dash pieces to hold the tubes in place. I need someone who has done this to verify the self tapping screw sizes again. I've hear so many type thrown out there. __________________ Never grow up, it's a trap! Last edited by chozn4service; 05-09-2012 at 09:25 PM.

05-11-2012, 12:28 PM	#922
camarco Drives: 2010 Synergy Camaro Join Date: Oct 2010 Location: Grant, NE Posts: 28 View My Garage	well just figured i would post some pictures here to acknowledge and thank 2SSRS for doing a great job with my ride sorry it's taken so long Ofer Attached Images

05-05-2012, 08:33 PM	#912
Synergy_9 Synergy_9 Drives: SS Synergy Green Camaro Join Date: Jun 2010 Location: Houston Posts: 100	Once Im ready to do this I might hit you up with some more questions

05-06-2012, 12:28 PM	#914
Synergy_9 Synergy_9 Drives: SS Synergy Green Camaro Join Date: Jun 2010 Location: Houston Posts: 100	Did you buy door panels from GM like me? And how long did it take you to do this?

05-09-2012, 07:55 PM	#918
Synergy_9 Synergy_9 Drives: SS Synergy Green Camaro Join Date: Jun 2010 Location: Houston Posts: 100	DCC1464 im in the same boat as you. I have a 1ss as well. Though I have to wait till next week to do this. From what I understand you tap the purple but I havent been able to try yet. If your able to do this post some pics, I could always use more since I havent tried yet

05-09-2012, 08:00 PM	#919
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 2,811	2SSRS- I PM'ed you about a week ago wanting to buy the tubing from you. Can you please advise what I need to do to order this from you? Thanks Russ

05-11-2012, 12:33 PM	#923
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Wow she look's grate, it was fun till you left then i got sick for 3 weeks, but its all good, injoy the car and will see you next year. LOL

05-11-2012, 12:51 PM	#924
camarco Drives: 2010 Synergy Camaro Join Date: Oct 2010 Location: Grant, NE Posts: 28 View My Garage	i forgot to list everything that you did.... so here goes, if i can remember it all Ofer installed the rearview camera mod, hardwired my radar detector, homelink with green LEDs in the buttons,LEDS in the exterior and interior door handles, LEDs in the door cubbys, under car LEDs, dash ABL, footwell lighting and ran the ABL around the whole door insert...... Did I forget anything, Ofer?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 09:20 PM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 11:37 AM
got my new Camaro today pictures included !!	yesno20102ssblack	Camaro Photos \| Spyshots \| Video \| Media Gallery	33	05-02-2009 10:05 AM
First Camaro Impressions (Pictures Included) --- Red Jewel Tintcoat!	dect	Camaro Photos \| Spyshots \| Video \| Media Gallery	80	01-27-2009 06:45 PM