Please help me find something similar in 20x10.5(or 11) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

shl4Z28 · 08-29-2011, 12:11 PM

I am also thinking of widening thru the folks at Weldcraft. I snooped around a bit and it looks as though everyone has nothing but good things to say. Can anyone point out a down side to using them? I am hoping that by only going from 10 to 10.5 that any possible fatigue on the wheels would be minimal.

Thanks!

blazzin1 · 08-29-2011, 01:20 PM

Quote:

Originally Posted by shl4Z28

I was looking at the NT05R and the sight stipulates at least a 10.5 for that but I will check again.

Thanks!

Yes, you're right, the NT05R (315/35R20) requires a 10.5" wheel minimum. But from your original post, it sounded like a Nitto 305 wide tire might be acceptable to you as well. So I thought the NT555R might work good for you. You could buy the exact wheels you want, and not need any major modifications to a brand new set of wheels. Just tryin' to help out....

.....And the NT555R is much more "streetable" than the NT05R.

cruznls · 08-29-2011, 05:42 PM

If you go with 20x10's ... look at the BOSS 338s......

D2-AUTOSPORT · 08-29-2011, 05:56 PM

Hey Speed Kills, good suggestion.

If anyone needs a set of these, the fitment is right and the price is low:

Bravado Americanna 2

shl4Z28 · 08-29-2011, 07:23 PM

Thanks to everyone!!

Still curious about widening thru Weldcraft. If anyone has any input I'd be VERY interested!

Speed Kills · 08-29-2011, 11:02 PM

Quote:

Originally Posted by D2-AUTOSPORT

Hey Speed Kills, good suggestion.

If anyone needs a set of these, the fitment is right and the price is low:

Bravado Americanna 2

This may be quite serendipitous. D2 - you know that is my car right?

D2-AUTOSPORT · 08-30-2011, 09:44 AM

Quote:

Originally Posted by Speed Kills

This may be quite serendipitous. D2 - you know that is my car right?

Yup, that's why I said good suggestion.

Speed Kills · 08-30-2011, 01:50 PM

Quote:

Originally Posted by D2-AUTOSPORT

Yup, that's why I said good suggestion.

Wasn't sure. I try not to promote myself. I am a "below the radar" member here.

Nine Ball · 08-30-2011, 08:14 PM

Most of the wheels mentioned in this thread are made in China, including the OEM Camaro wheels. Don't be fooled by an American brand name, that doesn't mean it is made in the USA. Even Chip Foose cast wheels are made by his cousin Chi Foo.

HumanWiki · 08-30-2011, 09:36 PM

So where are all the Pro-Union, Pro-America made everything nuts then? This thread is awfully quiet considering how many times people have said OEM wheels are made in China, American name doesn't mean made in America, etc... I expected to see quite the little flame action going on towards the end.. but, there's nothing.. I guess it's only header brands that get the flak.

shl4Z28 · 08-30-2011, 09:43 PM

Quote:

Originally Posted by Nine Ball

Most of the wheels mentioned in this thread are made in China, including the OEM Camaro wheels. Don't be fooled by an American brand name, that doesn't mean it is made in the USA. Even Chip Foose cast wheels are made by his cousin Chi Foo.

D2-AUTOSPORT · 09-09-2011, 03:36 PM

Quote:

Originally Posted by Nine Ball

Even Chip Foose cast wheels are made by his cousin Chi Foo.

GEEo · 09-30-2011, 01:12 AM

Quote:

Originally Posted by Speed Kills

This may be quite serendipitous. D2 - you know that is my car right?

do you have more pics of this car??

08-29-2011, 05:42 PM	#17
cruznls cruznls Drives: 2010 CAMARO Join Date: Feb 2011 Location: ILLINOIS Posts: 260 View My Garage	If you go with 20x10's ... look at the BOSS 338s...... Attached Images

08-30-2011, 08:14 PM	#23
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	Most of the wheels mentioned in this thread are made in China, including the OEM Camaro wheels. Don't be fooled by an American brand name, that doesn't mean it is made in the USA. Even Chip Foose cast wheels are made by his cousin Chi Foo. __________________ Fquick.com/NineBall

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to Find Production Date?	heidi	5th Gen Camaro SS LS LT General Discussions	20	03-29-2011 06:18 PM
How to find available inventory	caverman	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	10	11-12-2009 01:12 PM
BP Makes "Giant" Oil Find in Gulf of Mexico	KILLER74Z28	General Automotive + Other Cars Discussion	1	09-02-2009 07:39 PM
Have my vin but can't find my car	onechuck	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	5	07-24-2009 06:47 PM

08-29-2011, 12:11 PM	#15
shl4Z28 Drives: 2012 Nissan Xterra Pro-4x Join Date: Jan 2011 Location: Lost Wages, NV Posts: 329	I am also thinking of widening thru the folks at Weldcraft. I snooped around a bit and it looks as though everyone has nothing but good things to say. Can anyone point out a down side to using them? I am hoping that by only going from 10 to 10.5 that any possible fatigue on the wheels would be minimal. Thanks!

08-29-2011, 05:56 PM	#18
D2-AUTOSPORT Drives: Corvette C5 Join Date: Oct 2010 Location: New York Posts: 427	Hey Speed Kills, good suggestion. If anyone needs a set of these, the fitment is right and the price is low: Bravado Americanna 2

08-29-2011, 07:23 PM	#19
shl4Z28 Drives: 2012 Nissan Xterra Pro-4x Join Date: Jan 2011 Location: Lost Wages, NV Posts: 329	Thanks to everyone!! Still curious about widening thru Weldcraft. If anyone has any input I'd be VERY interested!

08-30-2011, 09:36 PM	#24
HumanWiki Drives: Car Join Date: Jun 2010 Location: Place Posts: 3,361	So where are all the Pro-Union, Pro-America made everything nuts then? This thread is awfully quiet considering how many times people have said OEM wheels are made in China, American name doesn't mean made in America, etc... I expected to see quite the little flame action going on towards the end.. but, there's nothing.. I guess it's only header brands that get the flak.