06-03-2020, 09:53 PM | #1 |
|
Bmr anti roll bar help
I was wondering if anyone has had to replace the bolt and spacer picture below before? And if so where did you find it,
I Emailed bmr but Unfortunately i was informed of this- I don’t have access to our Hardware room, so my guess is that you would have to source them Xxxx xxxxxx Muscle Car Sales Logo_450 BMR Suspension, Inc 813-986-9302 Phone 813-986-8055 Fax
__________________
Cai intake and a few other mods😎
|
06-03-2020, 09:58 PM | #2 |
|
Bar
What the set up looks like, I really just need the bearing spacer but haven't been able to find it anywhere
__________________
Cai intake and a few other mods😎
|
06-04-2020, 08:03 AM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,070
|
Try boltdepot.com
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-04-2020, 09:24 AM | #4 |
|
__________________
Cai intake and a few other mods😎
|
06-04-2020, 11:08 AM | #5 |
|
Bmr reached out to me, it was a miss communication between the 2 of us, so they are now sending me out the parts.
__________________
Cai intake and a few other mods😎
|
06-04-2020, 11:41 AM | #6 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,070
|
Awesome!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-04-2020, 03:28 PM | #7 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
|
|
|
|
|