06-22-2019, 05:52 PM | #1 |
Drives: 2016 Camaro SS Join Date: Jan 2016
Location: Texas
Posts: 108
|
Front suspension noise
2016 camaro ss w/mrc. Thought it was the strut making all this ungodly noise. I just replace the lt front strut...but the freaking noise is still there. Sounds like the car is bottoming out. Such a ******* loud noise. I checked the sway bar links they are tight...Also steering wheel control makes a like I am going to snap anytime soon sound when I move it all the way to the left and right. Guess the mfer going to the dealer because I am out of option.
Last edited by tadre1; 06-23-2019 at 03:01 PM. |
06-22-2019, 06:23 PM | #2 | |
Drives: Camaro 2SS & ZL1 Join Date: Mar 2018
Location: Oklahoma
Posts: 858
|
Quote:
If so, Have you tried to get under there while someone is turning the wheel back and forth?
__________________
2017 Camaro 2SS A8 Bright Yellow NPP MRC
2023 Camaro ZL1 A10 Radiant Red |
|
06-22-2019, 06:29 PM | #3 |
Drives: 2016 Camaro SS Join Date: Jan 2016
Location: Texas
Posts: 108
|
There is no recall for my steering assembly for my car
|
06-22-2019, 09:46 PM | #4 |
Drives: 2016 Camaro SS Join Date: Jan 2016
Location: Texas
Posts: 108
|
Anyone care to speculate???
|
06-22-2019, 10:39 PM | #5 |
Drives: Camaro 2SS & ZL1 Join Date: Mar 2018
Location: Oklahoma
Posts: 858
|
take a close look at all the bearings and joints. Upper strut mount to control arms and tie rods. If you aren't sure about a part, drive to a Chevy dealer while they are closed and take a look at a new one.
My last advice still holds, it'll be easy to pin down the noise with your head near it.
__________________
2017 Camaro 2SS A8 Bright Yellow NPP MRC
2023 Camaro ZL1 A10 Radiant Red |
06-23-2019, 12:54 AM | #6 |
Drives: 2016 Camaro SS Join Date: Jan 2016
Location: Texas
Posts: 108
|
To me it looks like the lower control arm for the front suspension boot is blown. There is grease all around it compared to the other side is clean. I can pull the boot down, the metal o-ring that holds the grease in the boot is gone, it the one that is attached to the knuckle. Could a blown lower control arm make this kind of noise??
Last edited by tadre1; 06-23-2019 at 01:11 AM. |
|
|
Post Reply
|
|
|