You are browsing camaro5 
 |
|
01-15-2018, 07:21 AM
|
#1 |
 Drives: Blaze Red 2014 2SS/RS Join Date: Sep 2016
Location: WV
Posts: 85
|
This ? is for the people who have a ACS-T4 splitter...
I am about to pull the trigger on a ACS-T4 Splitter for my 2014 Camaro SS and I want to know if there are issues with ground clearance. I understand that I will have to be careful pulling up to curb stops. I just don't want to buy and install something that is going to be a P.I.T.A. and drag on every little bump in the road....Thanx
|
|
|
|
01-15-2018, 07:26 AM
|
#2 |
           
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
I have the SLP splitter. I back in to all parking spaces whenever possible.
__________________
 STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
|
|
|
|
01-15-2018, 07:37 AM
|
#3 | |
|
Drives: Blaze Red 2014 2SS/RS Join Date: Sep 2016
Location: WV
Posts: 85
|
Quote:
|
|
|
|
|
|
01-15-2018, 09:24 AM
|
#4 |
|
Instagram: Sangstah
|
You should be fine at stock height but I would still avoid curb stops. I have a similar style splitter and I'm lowered 1.25" and I have to be extra careful with the front splitter on driveways and curb stops.
__________________
 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
|
|
|
|
01-15-2018, 09:37 AM
|
#5 |
|
It's in the hole!
Drives: '11 2SS L99 SGM, '18 2SS, M6, HWSE Join Date: Apr 2011
Location: Kentucky
Posts: 1,378
|
I have the ACS, no problem with everyday driving. Just have to be careful with speed humps, road debris, etc but that would be the case with any similar splitter.
|
|
|
|
|
01-15-2018, 09:53 AM
|
#6 |
Drives: Camaro 2ss/rs Join Date: May 2016
Location: Inland empire
Posts: 78
|
make sure and buy it with the bottom tray!!!! it makes it way stronger and adds the flat bottom surface to finish it off, and then you could also add a carbon fiber diffuser to extend extra protection if you wanted to. also through bolt it, some people in the past cut corners and used the plastic expansion fittings and if they had damaged the splitter then when they get up to speed they would loose the splitter!!! I have the acs splitter and slammed and its great!!!just gotta be carefull!!!
|
|
|
|
|
01-16-2018, 11:33 AM
|
#7 |
 
|
I'm on my 2nd ACS T4 due to swinging too wide into a parking stall next to a curb... ouch! Expensive lesson! I think for the price it should come with the under tray which helps the functionality. I'm lowered 1" and haven't had issues with speed bumps but steep driveways can cause scraping so take it real slow. It's a decent quality splitter but I'm disappointed a bit in the finish as it is a bit orange peel texture.
|
|
|
|
|
01-16-2018, 06:31 PM
|
#8 |
|
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,606
|
No issues with mine, I also try to back in everywhere. I haven't had any issues with speed bumps either.
(the splitter in my pic is not the T4, the T4 is the one on her now)
__________________
 2016 Hyper Blue 2SS |
|
|
|
|
01-16-2018, 09:56 PM
|
#9 |
Drives: 2015 2SS....white Join Date: May 2015
Location: Katy, TX
Posts: 527
|
I have the T4 and am lowered 1”, no issues but I’m used to having WAY lower cars.
__________________
2015 Summit White 2SS/RS with NPP.... Roto-Fab intake....Phastek lowering springs....BMR strut brace....custom cut blower cam and tune by Matt Sorian.....@MSTuning...BTR valve train....stainless power longtubes with HF cats....Phastek supplied
|
|
|
|
|
01-18-2018, 07:37 AM
|
#10 |
|
Drives: Blaze Red 2014 2SS/RS Join Date: Sep 2016
Location: WV
Posts: 85
|
I like how you painted yours I am professional painters and will be painting the spoiler when it arrives thanx for the idea
|
|
|
|
|
01-18-2018, 07:58 AM
|
#11 | |
Drives: 2014 2SS/RS Join Date: Jun 2013
Location: Orlando, FL
Posts: 793
|
Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
