Vengeance build in progress... - Page 4

Hellobatman · 01-08-2018, 01:13 PM

scooter k · 01-08-2018, 01:45 PM

That thing sounds awesome!

cosmoZL1 · 01-08-2018, 03:19 PM

Congrats with your Vengeance racing build. I spoke too them when I purchased my 17, ZL1, Red Hot, Man. I simply opted to stay closer to home. Current Mods as of 01/07/18 are Roto - Fab CAI, Metco damper and over drive pulley. Texas Speed long tube w/ 2"primaries with cross over. Both of which were ceramic coated perfectly and help keep temps down. I went with the Devils Own Meth injection stage 2 kit but, I went with the Snow 2 1/2 ga.tank mounted in the trunk. I didn't want the cheap tank everyone offered for the engine compartment. My pump is mounted right next to the tank and finished with stainless steel lines to the nozzles. I am at 700whp give or take. I had 662whp prior to the meth. I had the tune and install done here in San Antonio by Allen Nelson of Nelson Performance. Best thing is his dedication to doing it right, close so i can keep an up to date eyes on. I also installed an Aerotech Gauge cluster for my AFR Gauge. It is Bad Ass and top shelf. Best gen 6 gauge pod ANYWHERE!! Huge shout out to Roto Fab as well. Both manufactures excellent products bar none. Same for Allen, totally trust with my special car.

VAZL1 · 01-08-2018, 03:20 PM

Sounds bad ass...

ZL1_IslandBreeze · 01-08-2018, 03:55 PM

Wha!! Sounds amazining

Congrats... you can never have too much whp

aka Reckless · 01-09-2018, 11:13 AM

Glad you are happy Matt! Nice meeting you!

Hellobatman · 01-09-2018, 02:51 PM

Quote:

Originally Posted by aka Reckless

Glad you are happy Matt! Nice meeting you!

You as well!

01-08-2018, 03:19 PM	#45
cosmoZL1 Drives: 2017 ZL1 "Scarlett", 6 spd. Coupe Join Date: Mar 2012 Location: TEXAS!! Posts: 423	Congrats with your Vengeance racing build. I spoke too them when I purchased my 17, ZL1, Red Hot, Man. I simply opted to stay closer to home. Current Mods as of 01/07/18 are Roto - Fab CAI, Metco damper and over drive pulley. Texas Speed long tube w/ 2"primaries with cross over. Both of which were ceramic coated perfectly and help keep temps down. I went with the Devils Own Meth injection stage 2 kit but, I went with the Snow 2 1/2 ga.tank mounted in the trunk. I didn't want the cheap tank everyone offered for the engine compartment. My pump is mounted right next to the tank and finished with stainless steel lines to the nozzles. I am at 700whp give or take. I had 662whp prior to the meth. I had the tune and install done here in San Antonio by Allen Nelson of Nelson Performance. Best thing is his dedication to doing it right, close so i can keep an up to date eyes on. I also installed an Aerotech Gauge cluster for my AFR Gauge. It is Bad Ass and top shelf. Best gen 6 gauge pod ANYWHERE!! Huge shout out to Roto Fab as well. Both manufactures excellent products bar none. Same for Allen, totally trust with my special car. __________________ All my life I've been an Adrenalin Junkie.To some thats a bad thing.But? My bucket list is very short, very short indeed

01-08-2018, 03:20 PM	#46
VAZL1 Drives: 17 ZL1 Join Date: Mar 2017 Location: VA Posts: 1,075	Sounds bad ass... __________________ 2017 ZL1 Coupe M6, Red Hot Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp

01-08-2018, 01:45 PM	#44
scooter k Drives: ex-wife's car Join Date: Jan 2011 Location: Iowa Posts: 255	That thing sounds awesome!

01-08-2018, 03:55 PM	#47
ZL1_IslandBreeze Drives: 2017 Camaro ZL1 NightFall Grey A10 Join Date: Dec 2017 Location: N. Nevada Posts: 25	Wha!! Sounds amazining Congrats... you can never have too much whp

01-09-2018, 11:13 AM	#48
aka Reckless Drives: 2016 2SS Camaro Join Date: Sep 2016 Location: Cumming, GA Posts: 541	Glad you are happy Matt! Nice meeting you!

User Name		Remember Me?
Password