07-23-2021, 03:43 PM | #1 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
2021 ZL1 flex fuel sensor/harness install comments
No big deal but here is a small detail which may give some people a fit on an otherwise straightforward install. I won't bore you with the harness and other stuff which has been posted more than a few times.
The ECM plug is slightly different at the PIN 38 location and is blocked by a black plug. Other locations have a little gray plastic "toothpick appearing thing" which can be extracted with a pair of needle nose pliers. This little black plastic plug pushes out of location 38 from the wire side towards the metal connection side...not the other way. It is difficult to tell anything is there and it is frustrating. Corvette guys know all about this little turd in the way but it is new for me. My '17 did not have this blockage in this area and I was the original owner. Lethal Camaro has a Corvette flex fuel install which briefly touches upon the black plug. No Camaro install videos show anything about its existence. Pic included below:
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
07-23-2021, 05:40 PM | #2 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,082
|
|
07-24-2021, 12:10 PM | #3 |
Drives: '18 ZL1 1LE Join Date: May 2020
Location: KY
Posts: 219
|
Interesting! Thanks for the info. Never heard of that little guy either, just the gray one.
__________________
2018 ZL1 1LE - Summit White, PDR, Rotofab CAI, 95mm TB, CSP 2" catless LT's, JMS Voltage Booster, AEM X-series WB, DSX flex fuel sensor, Banks Data Monster, Tuned by Ted Jannetty, 5% Tint, Blackvue DR900S-2CH, Diode Dynamics lighting, IGL Kenzo ceramic coating
|
|
|
Post Reply
|
|
|