What did you do to your 6th Gen Camaro today?! - Page 480

2SSFifty · 03-20-2019, 06:49 AM

Quote:

Originally Posted by 1hprush

Thanks man, I might give those a try, I really wanted the clear ones from wildhammer, but don't want to remove the fascia to do the install.

Looks like it can be changed without removing it. https://youtu.be/MelxUEKkMrs

ChaosCC · 03-20-2019, 07:52 AM

Can anyone tell me where I can get one of these for my 2018 SS 1LE?

ChaosCC · 03-20-2019, 07:59 AM

Quote:

Originally Posted by JeromeS13

Mr. Fech shipped out my fuse box plate.

Can anyone tell me where I can get one of these?

chevyboy01438 · 03-20-2019, 09:08 AM

Quote:

Originally Posted by ChaosCC

Can anyone tell me where I can get one of these for my 2018 SS 1LE?

Chris Frech on facebook. He makes them. Profile picture of Deadpool! Just send him a message and he will reply back!

SSShark · 03-20-2019, 10:01 AM

Quote:

Originally Posted by ChaosCC

]

Can anyone tell me where I can get one of these?

His email is chrisfrech@gmail.com.
Mine will be delivered on Friday:

csurules · 03-20-2019, 07:54 PM

Quote:

Originally Posted by 8minus4

His email is chrisfrech@gmail.com.
Mine will be delivered on Friday:

Nice.....can I ask how much they cost?

SSShark · 03-20-2019, 08:00 PM

Quote:

Originally Posted by csurules

Nice.....can I ask how much they cost?

He charges $70. It adds a very nice touch to the engine bay!

chevyboy01438 · 03-21-2019, 07:02 AM

Finally got her out!!!

Infamus · 03-21-2019, 07:12 AM

I installed these rear side canards made by ZL1 Addons... pretty simple comes with two rivets for each side and uses existing OEM bolts.

I did flip them and used the shiny side up. I wrapped the shiny side with mat black vinyl. So far so good. I also have the front splitter extension but have not gotten around to installing it may be this weekend....

GroundhogSS · 03-21-2019, 02:14 PM

I decided to go ahead and update the software in the Range device . I haven't tried it in about two years because the version used back then, V7 something, gave me CELs for the transmission control module. It sounds like the V8.6 works as it should. I'll drive it for a few days and see how it works.

Range also claims that it can kill stop/start in some of the cars that have it. That would be nice to have if I had a car with that crap.

ChaosCC · 03-21-2019, 03:00 PM

Quote:

Originally Posted by 8minus4

His email is chrisfrech@gmail.com.
Mine will be delivered on Friday:

Got it . . . thanks!! Definitely need to get one!

majik755 · 03-21-2019, 03:52 PM

Got my Range two weeks ago, already had the V8.6 software and have had no issues. Kept an eye on performance and never dropped to 4cyl mode, and leave it in with no drain on the battery.

Didn't know and have no idea about the stop/start.

Quote:

Originally Posted by GroundhogSS

I decided to go ahead and update the software in the Range device . I haven't tried it in about two years because the version used back then, V7 something, gave me CELs for the transmission control module. It sounds like the V8.6 works as it should. I'll drive it for a few days and see how it works.

Range also claims that it can kill stop/start in some of the cars that have it. That would be nice to have if I had a car with that crap.

ssmike · 03-21-2019, 04:40 PM

Quote:

Originally Posted by Infamus

I installed these rear side canards made by ZL1 Addons... pretty simple comes with two rivets for each side and uses existing OEM bolts.

I did flip them and used the shiny side up. I wrapped the shiny side with mat black vinyl. So far so good. I also have the front splitter extension but have not gotten around to installing it may be this weekend....

I did the same thing but used gloss black wrap to match the side skirts.

SSShark · 03-21-2019, 06:28 PM

Quote:

Originally Posted by Glen e

Installed HEXVENTS today, smooth install

Glen, what splitter is that?

03-20-2019, 07:52 AM	#6708
ChaosCC Drives: 2018 Camaro SS 1LE Join Date: Feb 2019 Location: Southern Illinois Posts: 29 View My Garage	Can anyone tell me where I can get one of these for my 2018 SS 1LE? __________________ _________________________ 2018 Camaro SS 1LE - Summit White Chaos Custom Creationz "without chaos . . . nothing can evolve!"

03-21-2019, 07:02 AM	#6714
chevyboy01438 Drives: 2010 Camaro 1SS Join Date: Mar 2015 Location: Iowa Posts: 536	Finally got her out!!! Attached Images __________________ Mod List: Perma-Grin, Darkened tail lights, ZL1 3rd break light, JW Motorsports LED side markers, American Authorities Window Louver, American Authority ZL1 bumper, 11/30/17 \| Club F1FTY

03-21-2019, 07:12 AM	#6715
Infamus Drives: 2018 Camaro ZL1 Join Date: Feb 2019 Location: FL Posts: 345	I installed these rear side canards made by ZL1 Addons... pretty simple comes with two rivets for each side and uses existing OEM bolts. I did flip them and used the shiny side up. I wrapped the shiny side with mat black vinyl. So far so good. I also have the front splitter extension but have not gotten around to installing it may be this weekend.... Attached Images

03-21-2019, 02:14 PM	#6716
GroundhogSS Drives: '17 2SS convertible'20 Yukon Denali Join Date: Nov 2011 Location: Cedar Park, Texas Posts: 2,934	I decided to go ahead and update the software in the Range device . I haven't tried it in about two years because the version used back then, V7 something, gave me CELs for the transmission control module. It sounds like the V8.6 works as it should. I'll drive it for a few days and see how it works. Range also claims that it can kill stop/start in some of the cars that have it. That would be nice to have if I had a car with that crap. __________________ Richard 2017 2SS SIM convertible, A8, NPP, MRC, 56R wheels, GM CAI, Diode Dynamics Side Markers Delivered: 08/15/2016 #TeamBeckyD

User Name		Remember Me?
Password