10-26-2021, 03:23 PM | #1 |
Drives: 2020 camaro LT1 Join Date: Jul 2021
Location: fort lauderdale
Posts: 22
|
alignment with drag pak
2020 camaro lt1 installed the BMR rear cradle lockout,rear trailing arms and adjustable toe rods.All BMR.Also install weld bead locks 17x10 rear and 18x5 front.Stock alignment specs ok for this?
|
10-26-2021, 03:28 PM | #2 |
Drives: 2020 camaro LT1 Join Date: Jul 2021
Location: fort lauderdale
Posts: 22
|
2020 camaro lt1 with magnuson 2650
|
10-28-2021, 03:46 PM | #3 |
Petro-sexual
|
After a few hundred miles of street-rips, the insides on my DRs are about half the depth of the outer half, or so. I don’t remember how close alignment is between or models, but my car had stock suspension (until recently) and stock alignment (with about 2300-original miles). I imagine you could push the camber out more in an alignment like mine, but I wouldn’t purport to know if that was advantageous. I believe it would be, but have no experience.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
10-28-2021, 05:45 PM | #4 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,822
|
I'm running BMR upgrades too. Did a fresh alignment with my 20" street wheels then slapped on my dragpak, tracked straight and solid.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
10-29-2021, 10:02 AM | #5 | |
Petro-sexual
|
Quote:
FWIW - BMR rod end: upr control arms, upr/lwr trailing arms, tie rods, and rear cradle front braces; ZLE cradle bushings.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
11-01-2021, 11:42 AM | #6 |
Drives: 2020 camaro LT1 Join Date: Jul 2021
Location: fort lauderdale
Posts: 22
|
new alignment
alignment with drag pack
|
|
|
Post Reply
|
|
|