[Wire]

Is there any mechanism available to obtain just a drilling template for the ZL1 1LE wing spoiler, either OEM or from reproductions that match the same 3-stantion pattern?

For example:
https://wildhammermotorsports.com/16...eneral-motors/

If anyone has a used template they can part with, or any idea of where this may be obtained, please let me know!

Thanks.

[STALKER_174]

Does your trunk lid not have holes already? I was sure that all models had a spoiler of some kind, and Chev was smart enough to make the footprint the same

[arpad_m]

Originally Posted by STALKER_174

Does your trunk lid not have holes already? I was sure that all models had a spoiler of some kind, and Chev was smart enough to make the footprint the same

The LS/LT trunk lid has no holes, at least certainly not for the 2016-2018 model years (but very likely all the way up to 2022).

Alas, I don't know where to source the factory template from, I'd try sweet talking the parts guy/gal at a service department.

[Wire]

Originally Posted by arpad_m

The LS/LT trunk lid has no holes, at least certainly not for the 2016-2018 model years (but very likely all the way up to 2022).

Alas, I don't know where to source the factory template from, I'd try sweet talking the parts guy/gal at a service department.

Yes. It doesn't have holes in the top. It does have the holes and covers on the bottom, but I would really like a correct template to line it up on the top properly.

The local dealer doesn't keep Camaros on the lot and they don't stock things like this. :( There are no dealers within 4 hours of driving that would.