You are browsing camaro6 
10-31-2016, 09:37 AM
|
#1 |
 Drives: 2016 1LT M6 Join Date: Sep 2016
Location: South Florida
Posts: 93
|
Non-RS headlight projector height adjustment
I found the height adjustment screw for non-RS headlight low beam projector. Driver side shown below, with the access to the screw circled in red. I was able to use a long, thin phillips screwdriver. If memory serves, counterclockwise raises while clockwise lowers. Hope this helps anyone doing HID/LED upgrades. I found my driver side to be slightly high as delivered.
|
|
|
|
11-05-2016, 10:38 PM
|
#2 |
 Drives: Sold Join Date: Sep 2016
Location: 555.63.389738
Posts: 336
|
I'll try to adjust my headlight too, Thanks!
|
|
|
|
|
04-01-2019, 04:29 AM
|
#3 |
 
Drives: '17 1LT I4 Automatic Join Date: Aug 2017
Location: USA
Posts: 33
|
I'm gonna bump the hell out of this. I have a 2017 Non-RS, and a day ago I thought my driver side headlight went out since almost all the light was on the right side of the car. After getting out and checking the driver side is still on at full power, it's just shining out and over to the passenger side. I know I can adjust the vertical aim, but how do I keep my Camaro from looking like Forest Whitaker?
Sent from my Moto Z (2) using Tapatalk |
|
|
|
|
03-26-2021, 11:28 AM
|
#4 |
       
Drives: 2019 ZL-1 Join Date: Feb 2009
Location: Troy, MI & Naples, FL
Posts: 2,019
|
Bump for everyone....
__________________
2019 ZL-1 Acquired 4/23/21 at 6300 miles. Riverside Blue, A10, PDR. Traded in 2017 2SS with 6M and 32k miles. Continental Extreme Contact Sports. Now has 10,000 miles...
2012 Yukon XL Denali w/ 6.2 AWD |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
