[Shawnqa800720]

Originally Posted by Chrome383Z

Agree. I just put the GM kit on mine and it’s great. Now I want to get it out to a track. I’ve always built cars more for drag, this will be my first run on a road course. Cant wait.

You lucky dog - I look back on my start a few years ago. You are going to get hooked, If you loved the speed of the dragway, you are going to love adding corners. The drags only use on aspect of this cars capability. These things come alive on the track in a whole new way. You'll start out looking forward to the straights to feel that rush of acceleration, but you'll grow to need the corners, and that's what'll keep you coming back. Aim for smooth and Have Fun!

[Danew_377]

Is it possible to give up what the part numbers are for the struts and shocks only? I found one thread on here that has the struts which match websites for purchase, but the shocks don't show up.


Help would be greatly appreciated for the shock p/n.

[Chrome383Z]

Originally Posted by Danew_377

Is it possible to give up what the part numbers are for the struts and shocks only? I found one thread on here that has the struts which match websites for purchase, but the shocks don't show up.


Help would be greatly appreciated for the shock p/n.

I looked for it to, primarily for the reason if I ever have one fail I would like to replace. Haven’t had any luck yet.

[Shawnqa800720]

Originally Posted by Danew_377

Is it possible to give up what the part numbers are for the struts and shocks only? I found one thread on here that has the struts which match websites for purchase, but the shocks don't show up.


Help would be greatly appreciated for the shock p/n.

The dealer I use was able to find it but said it was difficult to tease it out. I didn't get the number since they were doing the install as a warranty replacement for a faulty shock. Not helpful for you, but even the dealer had trouble finding it. I'll see if the part number is still on the shock next time I am under there.

[rwise]

Originally Posted by chozn4service

Very nice and I went the same route after speaking with the GM engineers at PRI here in Indy. Love the look, stance as well as the improved handling!

I recently just purchased a 17 Camaro SS and I am looking at purchasing the lowering kit as well as new wheel and tire setup. Your setup is exactly what I am looking for, what are your wheel sizes and front and rear offset?