ZLI ADD ONS LIFT POINTS

Chris C 1SS 1LE · 06-09-2018, 01:04 PM

Just ordered. Has to make life easier and safer at dealer.

biker2k · 06-09-2018, 01:10 PM

best thing I did for the car

I also ordered some pucks and use them to actually do the jacking and then I use the lift points to rest on the jack stands

I can have all 4 wheels of the ground in less than 10 minutes

Chris C 1SS 1LE · 06-09-2018, 01:14 PM

Nice. What pucks did you go with? My jack stands are V shaped. i have a pad on my floor jack so think it would be OK

biker2k · 06-09-2018, 01:18 PM

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I use two stacked on one another to clear the body work...
also I bought rubber protectors at harbor freight for my jack stands
sorry don't have a link for that

ill add pics one of these days but I put the lift points furthest away from each other and then there is another jack point I use with the pucks

Chris C 1SS 1LE · 06-09-2018, 01:23 PM

Tracking. have the same lift stand protectors. Tango.

Chris C 1SS 1LE · 06-10-2018, 07:31 PM

Quote:

Originally Posted by biker2k

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I use two stacked on one another to clear the body work...
also I bought rubber protectors at harbor freight for my jack stands
sorry don't have a link for that

ill add pics one of these days but I put the lift points furthest away from each other and then there is another jack point I use with the pucks

Those arrive tomorrow. Thx.

wildchevy · 06-10-2018, 08:30 PM

need to order a set soon.

KyBoy · 06-10-2018, 08:40 PM

Mine are scratched up from jack stands...but my pinch welds are scratch free.

Chris C 1SS 1LE · 06-11-2018, 11:02 PM

Amazon stuff Arrived today neighbor wants some too. 17 bones and prime delivery. Appreciate the link and the fit is perfect do have C7 side skirts too

FH212 · 06-12-2018, 11:44 AM

Those ones on Amazon do you have to stack 2 or will 1 clear the plastics?

Turbo_J89 · 06-14-2018, 08:14 AM

I ordered 2 sets of ZL1 Add-ons Jack Pads and use 1 full set to support the Jack stands and 2 more pads mounted to the floor jack points works great. No need for pucks.

bullet3z · 06-14-2018, 08:09 PM

I just put on my ZL1 lift pads without lifting the car. Let's just say that was a pain. It is not easy to do while laying on the ground.

mjk3888 · 06-15-2018, 07:42 AM

To me the jack points are must have mods on this car! The pinch weld is so far recessed that its pretty unreachable without some sort of jack point.

MJP · 06-15-2018, 11:43 AM

It's like a slut running loose in hell just trying to get our car off the ground.

We have to purchase this and that. The correct jack. The correct stands. The correct adapters.

It's all to blame for that aluminum cross member up front... Do we even have a cross member up front underneath all that plastic?
I don't understand it. I lifted my C6 Vette from the aluminum CM at the front several times.
Has anyone removed the plastic to see what we're working with?
I would use two floor jacks at the same time to lift my C6 Vette straight off the ground.
Rear Dif and the Aluminum front CM.
One Jack in the rear, one in the front.
Set her down on the stands with aluminum pucks in the factory keyed fittings.

06-09-2018, 01:04 PM	#1
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	ZLI ADD ONS LIFT POINTS Just ordered. Has to make life easier and safer at dealer. __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

06-09-2018, 01:14 PM	#3
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Nice. What pucks did you go with? My jack stands are V shaped. i have a pad on my floor jack so think it would be OK __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

06-09-2018, 01:23 PM	#5
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Tracking. have the same lift stand protectors. Tango. __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

06-10-2018, 08:30 PM	#7
wildchevy Drives: 2018 Hyper Blue 2SS convertible Join Date: Aug 2017 Location: S.E.Wisconsin Posts: 182	need to order a set soon. __________________ 2018 HBM 2SS CONVERTIBLE A8

06-10-2018, 08:40 PM	#8
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	Mine are scratched up from jack stands...but my pinch welds are scratch free. __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

06-09-2018, 01:10 PM	#2
biker2k Drives: 2018 2ss 1le Join Date: Jan 2018 Location: Huntington, NY Posts: 474	best thing I did for the car I also ordered some pucks and use them to actually do the jacking and then I use the lift points to rest on the jack stands I can have all 4 wheels of the ground in less than 10 minutes

06-09-2018, 01:18 PM	#4
biker2k Drives: 2018 2ss 1le Join Date: Jan 2018 Location: Huntington, NY Posts: 474	https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 I use two stacked on one another to clear the body work... also I bought rubber protectors at harbor freight for my jack stands sorry don't have a link for that ill add pics one of these days but I put the lift points furthest away from each other and then there is another jack point I use with the pucks

06-11-2018, 11:02 PM	#9
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Amazon stuff Arrived today neighbor wants some too. 17 bones and prime delivery. Appreciate the link and the fit is perfect do have C7 side skirts too __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube Last edited by Chris C 1SS 1LE; 06-11-2018 at 11:03 PM. Reason: Spelling

06-12-2018, 11:44 AM	#10
FH212 Drives: 2021 Camaro SS 1LE Join Date: May 2009 Location: NM Posts: 888	Those ones on Amazon do you have to stack 2 or will 1 clear the plastics? __________________ 2021 Camaro 1SS 1LE - Red Hot 2015 Camaro Z/28 - Red Hot 2001 Mecham Trans Am #3 - 7.0L LS1

06-14-2018, 08:14 AM	#11
Turbo_J89 Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012 Location: Leesburg, VA Posts: 971 View My Garage	I ordered 2 sets of ZL1 Add-ons Jack Pads and use 1 full set to support the Jack stands and 2 more pads mounted to the floor jack points works great. No need for pucks.

06-14-2018, 08:09 PM	#12
bullet3z Drives: 2018 1SS 1LE Join Date: Aug 2017 Location: Pa Posts: 100	I just put on my ZL1 lift pads without lifting the car. Let's just say that was a pain. It is not easy to do while laying on the ground.

06-15-2018, 07:42 AM	#13
mjk3888 "M1SS1LE" Drives: 2017 SS 1LE Join Date: Dec 2015 Location: Upstate SC Posts: 2,906	To me the jack points are must have mods on this car! The pinch weld is so far recessed that its pretty unreachable without some sort of jack point. __________________ MJK3888 Instagram Link

06-15-2018, 11:43 AM	#14
MJP Drives: 2018 Camaro 1LE Summit White Join Date: Oct 2017 Location: NH Posts: 187	It's like a slut running loose in hell just trying to get our car off the ground. We have to purchase this and that. The correct jack. The correct stands. The correct adapters. It's all to blame for that aluminum cross member up front... Do we even have a cross member up front underneath all that plastic? I don't understand it. I lifted my C6 Vette from the aluminum CM at the front several times. Has anyone removed the plastic to see what we're working with? I would use two floor jacks at the same time to lift my C6 Vette straight off the ground. Rear Dif and the Aluminum front CM. One Jack in the rear, one in the front. Set her down on the stands with aluminum pucks in the factory keyed fittings.

User Name		Remember Me?
Password