06-02-2020, 06:12 PM | #1 |
Sto n Sho
With all the police driving around right now because of the protests, i figure I better get a plate on the front of my car. Don’t want to give them a reason to pull me over and give me a ticket. I don’t want to drill into my bumper and I don’t like the ones that attach to the tow hook. So, that leads me to the sto n sho. Do any of you have experience with this plate holder? I like that I can simply remove it (or put it on if I do get pulled over). Is it durable and sturdy?
|
|
06-02-2020, 06:28 PM | #2 |
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,032
|
I have it on my 2020 2SS, love the install, nice and clean and super easy to install and remove the plate...
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph... |
06-02-2020, 06:35 PM | #3 |
Drives: Chevrolet Camaro Join Date: May 2020
Location: Dallas, TX
Posts: 4
|
Mine has been in the truck for 6 months. I love it.
|
06-02-2020, 07:37 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,625
|
Absolute best, caSStro, you won't regret it. Mine is 2 years old, no rust, still a snug fit, works perfectly and it's near invisible.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
06-02-2020, 07:51 PM | #5 |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
I had one on my 2016 V6 for 3 yrs, Moved it and modified the bolt location to fit my 2017 Mustang and now have it on my 2019 Camaro SS. Well worth the cost
|
06-02-2020, 07:52 PM | #6 |
Awesome! I just found it on Amazon for $66! I double checked to make sure it’s the one that is made for cars with a splitter. It says it’s for 2017 Fifty models, but I’m pretty sure my 2018 SS has the same mounting points. Anyway, I checked a few minutes ago and it’s back to $80. So I just have gotten it at a discount somehow. Interesting.
|
|
06-02-2020, 07:56 PM | #7 |
Drives: 2019 1LE Join Date: Nov 2019
Location: NW
Posts: 137
|
__________________
"That my friend.. is the sweet succulent sound of the car preparing to ignite the wonderfully tasty nectar your V8 needs to send the screaming bald eagles furiously from the 4 pipes out of the rear of your vehicle"
|
06-03-2020, 07:43 AM | #8 |
Drives: 2018 2SS Hot Wheels Convertible Join Date: Dec 2012
Location: Badgerland
Posts: 254
|
It's the best solution I found, never run front plate and havent been stopped yet. But have the "forgot to install after last wash" response ready if I ever do. Its sits in the trunk till then!
Tim |
06-03-2020, 07:58 AM | #9 |
That is so funny! That’s the same exact excuse I was thinking of. Just washed the car and “forgot” to put it back on.
|
|
06-03-2020, 10:14 AM | #10 |
Drives: 2018 Camaro SS 1LE Join Date: Sep 2018
Location: Texas
Posts: 101
|
I have it on my 1LE. I think it is the perfect solution. With the plate on, I do scrape the plate on my driveway when backing out, but the lip doesn’t scrape.
|
06-03-2020, 12:58 PM | #11 |
Drives: 2019 Camaro 2SS Convertible Join Date: Mar 2017
Location: Minnesota
Posts: 14
|
I just installed it on my car last week. It is made of very good materials. Took about 10-15 minutes. Getting all the tools together took longer than attaching it. Plate hopefully will never have to be on but now I am ready just in case.
|
06-03-2020, 02:17 PM | #12 |
Drives: 2016 Camaro 1LT Join Date: Jan 2016
Location: California
Posts: 3,491
|
I'm tempted to zip tie the ring on the one i got for my girl's car (i dont use a sto n show on mine). It's way too easy to just remove the front plate just walking by if some kid just wants to be a dbag.
|
06-03-2020, 02:20 PM | #13 |
I was thinking about that. I can just remove the ring and when I want to take it off insert a paper clip to pull the pin.
|
|
07-04-2020, 08:24 AM | #14 |
Drives: 2023 Camaro SS 1LE Join Date: Apr 2019
Location: Virginia
Posts: 294
|
I have it on my 2018 SS. Love the ease of install and how easy it is to remove the plate. Definitely recommend.
|
|
|
Post Reply
|
|
|