12-03-2022, 04:42 PM | #1 |
Drives: White 2017 1SS Join Date: May 2017
Location: South carolina
Posts: 48
|
Check engine light
I dropped my car off for an oil change and when I got it back I plugged in my range technology device which turned off stabilitrak and power steering and throwing check engine light. Unplugged it and the code was "lost communication with engine control module" so i figured they updated the firmware in my car and shipped it back to get it updated.. cleared the codes and few days later codes p0430 and p2099 popped up. Swapped the o2 sensor for bank 2 downstream and now codes p0158 and p2270 are displaying... any advice?
|
12-07-2022, 02:17 PM | #2 |
Drives: 2022 LT1 RS Shadow Gray Metallic Join Date: Sep 2022
Location: Escondido
Posts: 1
|
I took my car in for an oil change cause the first one was free.
they were supposed to rotate the tires , they did not. 2000 miles later I get a check engine light. when I plugged the code scanner in I got a P0344 . the car now Idles rough. and then I get a text message . Service the engine and transmissions within 7 days |
|
|
Post Reply
|
|
|