[cirpower]

Originally Posted by EDFHOBBIES

I put my mount under the brace and washer under other bolt just for a cleaner look. Mine been tight for a year.

Thanks, as always great information, that is similar to how I fitted mine. Do you track your car with high grip tires, e.g. slicks?

[Gary H]

the ADM kit fits nicely under a BMR Brace FYI

[kwav8r]

Originally Posted by Rodan

The Cordes setup is definitely the best value, but I would prefer the higher placement of the other reservoirs for bleeding.

Also, I'm not really interested in the extra capacity. 1 gallon won't make a significant difference. For HPDE, you're just hauling more hot water around the track.

I just want a small reservoir high up to ease the bleeding issues.

The Cordes tank does a great job of removing air from the system.

[Rodan]

I found what appears to be a part # for the Edelbrock surge tank: 61-2618

From the Edelbrock site:



From the only place I can find it online:

https://www.good-win-racing.com/Mazd...ml?id=U3Y75wqS



Listed as a replacement part for the Edelbrock MX-5 supercharger kit... $75.00

I have not called Edelbrock to see if they will sell the parts separately, as I have been placed in a time crunch, and may be ordering one of the other options today...

Also, the tank looks quite small, and I don't like the fact that both lines are on the same level...

[EDFHOBBIES]

Parts used to mount the reservoir and mate to stock intercooler hoses.

Gates 19839 premolded heater hose U will cut and route $10.00 Orileys
Gates 28479 premolded heater hose U will cut and route $10.00 Orileys
2 5/8 to 3/4 coupler $1.99
2 24mm constant tension spring hose clamps These are black look better $1.00 ea
6 26mm constant tension spring hose clamps $1.00
Edelbrock 51-7100 Tank – black reservoir like Magi or ADM $27.00
Edelbrock 51-7008 Tank lid - $13.00
Edelbrock 79-9177 Tank bracket - needs a bit of mods to attach to strut $35.00

black tank not the clear option!

[Gunkk]

Originally Posted by Rodan

I found what appears to be a part # for the Edelbrock surge tank: 61-2618

From the Edelbrock site:



From the only place I can find it online:

https://www.good-win-racing.com/Mazd...ml?id=U3Y75wqS



Listed as a replacement part for the Edelbrock MX-5 supercharger kit... $75.00

I have not called Edelbrock to see if they will sell the parts separately, as I have been placed in a time crunch, and may be ordering one of the other options today...

Also, the tank looks quite small, and I don't like the fact that both lines are on the same level...

Well done!

Thank you!

[Rodan]

I installed my ADM kit this afternoon. It's a great kit and an easy install.

I posted a walkthrough to try to consolidate a lot of the info on IC reservoirs, and to show an install with pics.

Install thread is here: https://www.camaro6.com/forums/showt...4#post10657804

[EDFHOBBIES]

Originally Posted by Rodan

I installed my ADM kit this afternoon. It's a great kit and an easy install.

I posted a walkthrough to try to consolidate a lot of the info on IC reservoirs, and to show an install with pics.

Install thread is here: https://www.camaro6.com/forums/showt...4#post10657804

Nice.. I just should you how to do it for 200.00 cheaper.

[Rodan]

Originally Posted by EDFHOBBIES

Nice.. I just showed you how to do it for 200.00 cheaper.

Yeah, I had originally planned the DIY version, but I was in a time crunch with a track event next weekend and didn't want to be sourcing parts from all over the place.

[Markoz28]

Originally Posted by EDFHOBBIES

Parts used to mount the reservoir and mate to stock intercooler hoses.

Gates 19839 premolded heater hose U will cut and route $10.00 Orileys
Gates 28479 premolded heater hose U will cut and route $10.00 Orileys
2 5/8 to 3/4 coupler $1.99
2 24mm constant tension spring hose clamps These are black look better $1.00 ea
6 26mm constant tension spring hose clamps $1.00
Edelbrock 51-7100 Tank – black reservoir like Magi or ADM $27.00
Edelbrock 51-7008 Tank lid - $13.00
Edelbrock 79-9177 Tank bracket - needs a bit of mods to attach to strut $35.00

black tank not the clear option!

Will most likely go this route if I port the stock SC. Thanks

[ProjectZL1]

Originally Posted by EDFHOBBIES

Gates 19839 premolded heater hose U will cut and route $10.00 Orileys
Gates 28479 premolded heater hose U will cut and route $10.00 Orileys
2 5/8 to 3/4 coupler $1.99
2 24mm constant tension spring hose clamps These are black look better $1.00 ea
6 26mm constant tension spring hose clamps $1.00
Edelbrock 51-7100 Tank – black reservoir like Magi or ADM $27.00
Edelbrock 51-7008 Tank lid - $13.00
Edelbrock 79-9177 Tank bracket - needs a bit of mods to attach to strut $35.00

So Just go to the Edelbrock website and enter the part numbers in a search for the edelbrock parts? I may do this, will i need to purchase some sort of heat barrier sleeve to go over the hose like in the ADM kit? Thanks.

[EDFHOBBIES]

Originally Posted by ProjectZL1

So Just go to the Edelbrock website and enter the part numbers in a search for the edelbrock parts? I may do this, will i need to purchase some sort of heat barrier sleeve to go over the hose like in the ADM kit? Thanks.

Better to call with numbers or go to a resaler

if you want the cover buy by the foot at a hydraulic hose maker place.. I had it on mine then took it off it looks better without and the silver clamps!

[ProjectZL1]

Originally Posted by EDFHOBBIES

Better to call with numbers or go to a resaler

if you want the cover buy by the foot at a hydraulic hose maker place.. I had it on mine then took it off it looks better without and the silver clamps!

Got it, i actually just left their site trying to search and couldn't find anything with those numbers. I will try to call them direct soon.


I was talking about the black heat sleeve on the hoses pictured. I hate silver worm clamps also.

[EDFHOBBIES]

Originally Posted by ProjectZL1

Got it, i actually just left their site trying to search and couldn't find anything with those numbers. I will try to call them direct soon.


I was talking about the black heat sleeve on the hoses pictured. I hate silver worm clamps also.

its not heat sleeve it stnd hyd sleeve see pic