[Ssls1]

Ordered a used differential from Day's Parts Yard. Awesome service. Paid for it on Wednesday night and got it by Saturday. Here are the pics of the broken diff. Im curious to open it up and find out what s wrong.

[Ssls1]

Does anyone know what etorx it is to open it up?

[cmitchell17]

Originally Posted by Ssls1

Does anyone know what etorx it is to open it up?

It's a torx plus EP20 socket you need, but watch the wall thickness of the socket you get since some of the machined pockets for screw clearance in the casting is tight and doesn't look like they machined it big enough for proper clearance for a EP20 but maybe its not standardized or they had clearance issues.

So my stock rear gave out at about 100k when the washers/shims on the clutch pack broke in 2 and both sides were broken. It was still driving fine but I could hear a faint whirring noise.

Check out this thread:

https://www.camaro6.com/forums/showthread.php?t=602957

We need to figure out how we can get someone to make aftermarket parts and gears for this rear.