What did you do to your 6th Gen Camaro today?! - Page 339

Cgocifer · 03-21-2018, 09:34 PM

Quote:

Originally Posted by rocknss

Installed new pedals and a Vitesse Motorsports throttle controller.

What about that dead pedal? What does that throttle controller do?

driven2exceSS · 03-22-2018, 07:50 AM

Came back from getting a 4-wheel alignment and took the pic that I stated I would do almost 3-wks ago, before going back into hibernation (again)

arpad_m · 03-22-2018, 08:01 AM

Quote:

Originally Posted by Soleil

Start installing my pedal cover.

Soleil, where did you get the dead pedal cover? You got these pieces custom made perhaps?

Ryanbabz71 · 03-22-2018, 10:16 AM

Dropped it off last night for tint and clearbra

Ryan B.

Soleil · 03-22-2018, 01:18 PM

Quote:

Originally Posted by arpad_m

Soleil, where did you get the dead pedal cover? You got these pieces custom made perhaps?

Yes, it’s custom made. I went to the laser cutting shop.

Martinjlm · 03-22-2018, 03:44 PM

What did I do to my 6th Gen Camaro today? I drove it into Thayer Chevrolet in Bowling Green, Ohio with my flashers going. This after watching my rear right tire pressure count down all the way from 38 psi to 0.

starscream5000 · 03-22-2018, 06:02 PM

Took it to he dealer to have the groaning diff serviced/replaced. They gave me a 2018 Equinox 2.0T to drive home in, lol.

1hprush · 03-22-2018, 06:48 PM

Quote:

Originally Posted by driven2exceSS

Came back from getting a 4-wheel alignment and took the pic that I stated I would do almost 3-wks ago, before going back into hibernation (again)

Great looking car! Tell me your wheel specs, tires/rims. They look awesome, are you lowered? Thx.

driven2exceSS · 03-22-2018, 08:27 PM

Much appreciated!! Yes, ...BMR lowering springs, MRR M017's Rims with Goodyear Supercar 3's 285/30/20 Front, and 305/30/20 Rear.

TEX1LE · 03-22-2018, 08:33 PM

Shaved more weight with a lithium ion battery from RDP store.

rocknss · 03-22-2018, 08:35 PM

Quote:

Originally Posted by Cgocifer

What about that dead pedal? What does that throttle controller do?

I purchased the pedal kit from Chevy which does not include the Dead Pedal which I'm OK with. The Throttle Controller eliminates the delay from the electronic pedal.

Cgocifer · 03-22-2018, 11:31 PM

Quote:

Originally Posted by rocknss

I purchased the pedal kit from Chevy which does not include the Dead Pedal which I'm OK with. The Throttle Controller eliminates the delay from the electronic pedal.

Ah, cool!

I haven't found a kit that has the dead pedal. Guy above had one made.

I'm surprised that the 1LE doesn't come with aluminum pedals. Oh well, no biggie.

Cgocifer · 03-22-2018, 11:32 PM

Quote:

Originally Posted by driven2exceSS

Came back from getting a 4-wheel alignment and took the pic that I stated I would do almost 3-wks ago, before going back into hibernation (again)

Looks good! I love my 1LE wheels. In my opinion, the best factory wheel out there. I just wish they were black instead of dark grey.

arpad_m · 03-22-2018, 11:38 PM

Quote:

Originally Posted by Soleil

Yes, it’s custom made. I went to the laser cutting shop.

Thought so, thanks. Great job

(I don't see why GM doesn't include a dead pedal cover for the Camaro, but they do for the Cadillac package. The throttle pedal cover seems to be the exact same piece in both... anyway, absolute 1st world problem, I'll just move on.)

03-22-2018, 07:50 AM	#4734
driven2exceSS Drives: 2016 2SS BLK A8 Vert Join Date: Dec 2017 Location: MA Posts: 1,029	Came back from getting a 4-wheel alignment and took the pic that I stated I would do almost 3-wks ago, before going back into hibernation (again) Attached Images __________________ NPP, MRC, Tinted side & rear reflectors, OEM ZL1 Rockers / 3rd Brake / Darken tail lights, OEM Blk rear splash guards, Satin hood wrap, Fuse pull, Sound tube delete, Cat delete, Ported 95 TB, Ported MSD IM, Dry RotoFab, ARH 1 7/8 headers, E85, "Performance Dyno" Tune, BMR "pieces", "Track" alignment, Hawk DCT-70/70's w/SRF, Goodridge lines, Ti shims, Red powdered calipers, 18" APEX SM-10's w/ Pirelli DH's, FE4 Vert swaybars, Brake cooling ducts, ATI 10% UD, Vorshlag camber plates, OEM 1LE Splitter w/APR Ext., Velossa BIG MOUTH Ram Air, CF QA1, ZLE brakes(F)

03-22-2018, 10:16 AM	#4736
Ryanbabz71 Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,231 View My Garage	Dropped it off last night for tint and clearbra Ryan B. __________________ Ryan * 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680

03-22-2018, 03:44 PM	#4738
Martinjlm Retired from GM Drives: 2017 Camaro Fifty SS Convertible Join Date: Mar 2017 Location: Detroit Posts: 5,240	What did I do to my 6th Gen Camaro today? I drove it into Thayer Chevrolet in Bowling Green, Ohio with my flashers going. This after watching my rear right tire pressure count down all the way from 38 psi to 0. __________________ 2017 CAMARO FIFTY SS CONVERTIBLE A8 \| MRC \| NPP \| Nav \| HUD \| GM Performance CAI \| Tony Mamo LT1 V2 Ported TB \| Kooks 1-7/8” LT Headers \| FlexFuel Tune \| Thinkware Q800 Pro front and rear dash cam \| Charcoal Tint for Taillights and 3rd Brakelight \| Orange and Carbon Fiber Bowties \| 1LE Wheels in Gunmetal Gray \| Carbon Fiber Interior Overlays \| Novistretch bra and mirror covers \| Tow hitch for bicycle rack \|

03-22-2018, 08:27 PM	#4741
driven2exceSS Drives: 2016 2SS BLK A8 Vert Join Date: Dec 2017 Location: MA Posts: 1,029	Much appreciated!! Yes, ...BMR lowering springs, MRR M017's Rims with Goodyear Supercar 3's 285/30/20 Front, and 305/30/20 Rear. __________________ NPP, MRC, Tinted side & rear reflectors, OEM ZL1 Rockers / 3rd Brake / Darken tail lights, OEM Blk rear splash guards, Satin hood wrap, Fuse pull, Sound tube delete, Cat delete, Ported 95 TB, Ported MSD IM, Dry RotoFab, ARH 1 7/8 headers, E85, "Performance Dyno" Tune, BMR "pieces", "Track" alignment, Hawk DCT-70/70's w/SRF, Goodridge lines, Ti shims, Red powdered calipers, 18" APEX SM-10's w/ Pirelli DH's, FE4 Vert swaybars, Brake cooling ducts, ATI 10% UD, Vorshlag camber plates, OEM 1LE Splitter w/APR Ext., Velossa BIG MOUTH Ram Air, CF QA1, ZLE brakes(F)

03-22-2018, 06:02 PM	#4739
starscream5000 Drives: 2017 Hyper Blue 2ss Join Date: Feb 2018 Location: Western KY Posts: 71	Took it to he dealer to have the groaning diff serviced/replaced. They gave me a 2018 Equinox 2.0T to drive home in, lol.

03-22-2018, 08:33 PM	#4742
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	Shaved more weight with a lithium ion battery from RDP store.

User Name		Remember Me?
Password