12-06-2019, 11:24 AM | #1 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
ZL1 dyno numbers? Kong blower and meth...
Taking my 19 ZL1 (A10) to CSP here in the next 2 weeks... doing a 1-7/8 LTs and ARH exhaust, Kong blower/103 TB, big gulp, lower pulley (9.17) and meth injection.
Any ideas on numbers it should put down?
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
12-06-2019, 11:46 PM | #2 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I’m thinking 720whp. If you have not bought the headers yet, you might want to step up to 2” so you have room for any future mods. If you did cam too I would say 800whp
|
12-07-2019, 07:55 AM | #3 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
I’d do the 2 inch LTs with those mods. No reason not to. My ARH 2 inch LTs have plenty of clearance, zero issues.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2 headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
12-07-2019, 10:20 AM | #4 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
We've made over 700rwhp with a Jokerz Full tilt blower and 93 octane with no meth. With Meth you should get north of that
|
12-07-2019, 11:10 AM | #5 |
Drives: 2017 ZL1 Join Date: Mar 2014
Location: DFW, TX
Posts: 302
|
I jumped into your Facebook post and didn't thoroughly review the mods.
On my car with: Kong ported 1.9 Kooks 2" headers - no cats 9.17 lower pulley Corsa mid pipe AMP camshaft, ported heads and tune DSX auxiliary pump Rotofab Big Gulp dual nozzle methanol On E85, it's 851 rwhp. |
12-07-2019, 12:45 PM | #6 |
Drives: 2019 Camaro ZL1 Join Date: Jul 2019
Location: Pensacola
Posts: 98
|
My car is 2019 A10 ZL1
-kong blower porting -2.17 upper grip tech -stock lower -kooks 2 inch with cat deletes -stock catback -alky meth kit (50/50 mix) -weaponX heat exchanger -rotofab big gulp Mighty Mouse wild catch can Car made 682whp 701tq on a dynojet. So far it’s been a 1.43 60ft and went 6.46 1/8th mile. Pretty sure car has a little more with the addition of my front runners which I’m still waiting on and with some perfect weather. Have fun with your setup! |
12-07-2019, 04:39 PM | #7 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
I already have the 1 7/8 ARH LT's
Thanks for the feedback everyone... i was aiming for 700whp, i think i should hit it!
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
12-09-2019, 08:08 AM | #8 |
Drives: 2018 ZL1 A10 Join Date: Sep 2014
Location: NEPA
Posts: 450
|
It's in good hands at CSP. They're good guys.
__________________
SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback
@SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado |
12-09-2019, 09:20 AM | #9 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,675
|
Being in Virginia you’d be better of going south to pray
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
12-11-2019, 05:01 PM | #10 |
Drives: 19 Z06 Join Date: Dec 2018
Location: Elmira
Posts: 13
|
Not a ZL1 but a Z06 and with the JokerZ Full Tilt blower car made 785/860-no headers either.
9.2@148 at the track too. |
12-11-2019, 06:29 PM | #11 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
no thanks
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
12-11-2019, 07:30 PM | #12 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,675
|
Why
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
12-12-2019, 10:07 AM | #13 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
Just didnt feel like dropping the car off in someone's yard for a month....
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
12-12-2019, 11:37 AM | #14 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,675
|
That’s understandable. Good luck.
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
|
|
Post Reply
|
|
|