Billet S488 is in, Dyno 10am Tom

Goertz · 02-09-2018, 10:50 AM

New Turbo is in and we're strapping down on the tomorrow morning.

Aiming for nothing less than 1200whp and trq.

Goertz · 02-09-2018, 10:51 AM

more

parish8 · 02-09-2018, 11:08 AM

Nice, can’t wait for some numbers!

ninetres · 02-09-2018, 11:27 AM

I love it! Looking forward to 100mph burn out videos!!!

PackersFan26 · 02-09-2018, 06:17 PM

Thats a very large turbo

laynlo15 · 02-09-2018, 08:29 PM

Very cool. I know your building an intake for a buddy of mine for his LS Trans Am. Good luck on your dyno pulls. Hope you hit your numbers.

Goertz · 02-09-2018, 08:48 PM

Quote:

Originally Posted by laynlo15

Very cool. I know your building an intake for a buddy of mine for his LS Trans Am. Good luck on your dyno pulls. Hope you hit your numbers.

Brian?

his is the one on the left

just left today along with his tb and billet tb spacer

oldman · 02-09-2018, 11:12 PM

each one is a work of art.

laynlo15 · 02-10-2018, 06:18 AM

Did you send those pics to Brian yet? I've been trying to get him motivated for a while, this should do it. Its beautiful and he'll be proud to open the hood to show it off after he gets it into the 8's.

crosive · 02-10-2018, 06:23 AM

ok so. that's large. can't wait to see video.

laynlo15 · 02-10-2018, 08:47 AM

Its gonna be wicked.

laynlo15 · 02-10-2018, 03:57 PM

Did you post some big numbers this morning? Hope so.

hitmix300 · 02-10-2018, 10:10 PM

DAYUM check out that billet compressor wheel. wicked..

This thread has so much win!!!!

Tcamaro · 02-11-2018, 07:33 AM

UPDATE??

02-09-2018, 10:50 AM	#1
Goertz Drives: 2016 1SS Auto Join Date: Mar 2016 Location: Houston Posts: 530	Billet S488 is in, Dyno 10am Tom New Turbo is in and we're strapping down on the tomorrow morning. Aiming for nothing less than 1200whp and trq. Attached Images

02-09-2018, 10:51 AM	#2
Goertz Drives: 2016 1SS Auto Join Date: Mar 2016 Location: Houston Posts: 530	more Attached Images

02-09-2018, 11:08 AM	#3
parish8 Drives: 17 SS a8 Join Date: Feb 2010 Location: omaha Posts: 1,678	Nice, can’t wait for some numbers! __________________ dropped a valve in the 6.2. now running a drop in rods and piston 5.3 best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472

02-09-2018, 06:17 PM	#5
PackersFan26 Drives: 2017 Summit White 2SS Join Date: Jan 2017 Location: Dublin, CA Posts: 546	Thats a very large turbo __________________ Follow me on IG: @lip_stick.ss

02-09-2018, 08:29 PM	#6
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Very cool. I know your building an intake for a buddy of mine for his LS Trans Am. Good luck on your dyno pulls. Hope you hit your numbers. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-09-2018, 11:27 AM	#4
ninetres Drives: Crush ZLE M6 \| 2000 Corvette FRC Join Date: Jun 2010 Location: Cencal Posts: 1,659	I love it! Looking forward to 100mph burn out videos!!!

02-09-2018, 11:12 PM	#8
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,320	each one is a work of art. __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

02-10-2018, 06:18 AM	#9
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Did you send those pics to Brian yet? I've been trying to get him motivated for a while, this should do it. Its beautiful and he'll be proud to open the hood to show it off after he gets it into the 8's. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-10-2018, 06:23 AM	#10
crosive Drives: 18 zl1 Join Date: Aug 2017 Location: central alabama Posts: 935	ok so. that's large. can't wait to see video.

02-10-2018, 08:47 AM	#11
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Its gonna be wicked. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-10-2018, 03:57 PM	#12
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Did you post some big numbers this morning? Hope so. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-10-2018, 10:10 PM	#13
hitmix300 2016 loaded 2SS Drives: Maverick X3 Turbo R Join Date: Feb 2015 Location: United States Posts: 242	DAYUM check out that billet compressor wheel. wicked.. This thread has so much win!!!!

02-11-2018, 07:33 AM	#14
Tcamaro Drives: 16' 2SS Join Date: Jul 2016 Location: Frankfort Posts: 80	UPDATE??

User Name		Remember Me?
Password