** F/S ** BRAND NEW FORGED Gen 5 LT1 Short Block - $4399

gtrain41 · 02-22-2018, 11:41 AM

I have for sale a BRAND NEW FORGED Gen V LT1 Short block for sale. This would be a perfect upgrade or replacement for a high horsepower boosted or N/A setup. This is the best deal on a new forged bottom end that you will find. The short block includes:

- brand new GM LT1 Engine Block (no core required)
- Stock Crankshaft
- Manley H-Beam Rods
- Manley 2618 Pistons (either 10.5:1 OR 11.7:1 compression, I have both
pistons still available)
- ARP Rod Bolts
- Premium Total Seal Rings
- Clevite Bearings
- Professionally Balanced (please allow a few days for balancing as it will be different depending on piston selected)

Price is $4399 plus shipping...PM if interested...

RideZX6R · 02-24-2018, 11:12 PM

Since you're calling it a shortblock... I'm assuming it's assembled, correct?

If so, who assembled it and are receipts available for the parts and build?

Pics would speak volumes here.

hitmix300 · 02-26-2018, 03:42 PM

Quote:

Originally Posted by RideZX6R

Since you're calling it a shortblock... I'm assuming it's assembled, correct?

If so, who assembled it and are receipts available for the parts and build?

Pics would speak volumes here.

I would assume since he offers two different compression ratios, that the rotating assembly is not installed.

I would be interested, but would like to re-use my current cylinder block.

Good luck with sale OP

gtrain41 · 02-26-2018, 04:18 PM

I should have clarified in the original post, but this exact short block is not built yet. I need to know which pistons you want in order to have the rotating assembly properly balanced for the correct bobweight, as well as know the intended application as the ring gaps will be different for a forced induction versus a N/A setup. Pics attached of the rods, new rings, and bearings. The block shown is NOT a brand new block, but is the start of a build for a different customer. I do not store the new blocks here and I get them directly from GM within a couple of days. As you can see, I have other engines being built currently.
As mentioned, I am providing the build with new parts and will provide receipts for the parts that I have. PM if you are interested.

gtrain41 · 03-07-2018, 11:41 AM

ttt

gtrain41 · 03-20-2018, 12:40 PM

bump...

NickyRacerBoy · 03-27-2018, 10:43 AM

I am working with Dave G on one now. I can tell you that so far his communication had been very good. I should have more info to report very soon...hopefully this weekend.

Nick

gtrain41 · 04-02-2018, 12:54 PM

bump

NickyRacerBoy · 04-03-2018, 10:01 PM

Hello all! I just picked up a new forged shortblock from Dave. He was great from the start to the finish. His communication was great to.. If I had a question or concern he would answer in a timely matter. B

gtrain41 · 04-05-2018, 07:56 AM

Thanks for the props Nick!

I still have a motor available for another lucky person!

gtrain41 · 04-12-2018, 10:28 AM

bump

cncmotors · 04-14-2018, 04:38 AM

Still for sale?

gtrain41 · 04-14-2018, 07:45 AM

Yes it is still available. PM sent.

gtrain41 · 04-23-2018, 01:44 PM

still available...

02-22-2018, 11:41 AM	#1
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	F/S BRAND NEW FORGED Gen 5 LT1 Short Block - $4399 I have for sale a BRAND NEW FORGED Gen V LT1 Short block for sale. This would be a perfect upgrade or replacement for a high horsepower boosted or N/A setup. This is the best deal on a new forged bottom end that you will find. The short block includes: - brand new GM LT1 Engine Block (no core required) - Stock Crankshaft - Manley H-Beam Rods - Manley 2618 Pistons (either 10.5:1 OR 11.7:1 compression, I have both pistons still available) - ARP Rod Bolts - Premium Total Seal Rings - Clevite Bearings - Professionally Balanced (please allow a few days for balancing as it will be different depending on piston selected) Price is $4399 plus shipping...PM if interested...

02-24-2018, 11:12 PM	#2
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	Since you're calling it a shortblock... I'm assuming it's assembled, correct? If so, who assembled it and are receipts available for the parts and build? Pics would speak volumes here. __________________ -Seven '17 SS 1LE - 1LAP 1LE (Now with more 427!) '18 F150 Platinum Powerstroke diesel '22 Kia EV6 First Edition '18 RS3 (1 of 2) Cumulus Blue '24 911 T (ordered) Formers... '19 RS5 Sportback Sonoma Green \| '07 Cayman S 6MT \| '16 Audi S3 Prestige Viper Green (APR Stage 3+) \| '19 Mustang Shelby GT350R \| '17 SS 1LE MBM 575whp all-motor

02-26-2018, 04:18 PM	#4
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	I should have clarified in the original post, but this exact short block is not built yet. I need to know which pistons you want in order to have the rotating assembly properly balanced for the correct bobweight, as well as know the intended application as the ring gaps will be different for a forced induction versus a N/A setup. Pics attached of the rods, new rings, and bearings. The block shown is NOT a brand new block, but is the start of a build for a different customer. I do not store the new blocks here and I get them directly from GM within a couple of days. As you can see, I have other engines being built currently. As mentioned, I am providing the build with new parts and will provide receipts for the parts that I have. PM if you are interested.

03-07-2018, 11:41 AM	#5
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	ttt

03-20-2018, 12:40 PM	#6
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	bump...

03-27-2018, 10:43 AM	#7
NickyRacerBoy Drives: 1LE Join Date: Sep 2017 Location: East Coast Posts: 1,473	I am working with Dave G on one now. I can tell you that so far his communication had been very good. I should have more info to report very soon...hopefully this weekend. Nick

04-02-2018, 12:54 PM	#8
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	bump

04-03-2018, 10:01 PM	#9
NickyRacerBoy Drives: 1LE Join Date: Sep 2017 Location: East Coast Posts: 1,473	Hello all! I just picked up a new forged shortblock from Dave. He was great from the start to the finish. His communication was great to.. If I had a question or concern he would answer in a timely matter. B

04-05-2018, 07:56 AM	#10
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	Thanks for the props Nick! I still have a motor available for another lucky person!

04-12-2018, 10:28 AM	#11
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	bump

04-14-2018, 04:38 AM	#12
cncmotors Drives: camaro Join Date: Sep 2016 Location: Korea Posts: 191	Still for sale?

04-14-2018, 07:45 AM	#13
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	Yes it is still available. PM sent.

User Name		Remember Me?
Password

04-23-2018, 01:44 PM	#14
gtrain41 Drives: 2001 Chevrolet Corvette Join Date: Jun 2013 Location: NJ Posts: 147	still available...