11-06-2017, 05:56 PM | #1 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
What part is this?
Anyone know what the part number is for this? It is like a catch can for the LT1 if I'm not mistaken that has 3 PCV connections. I had a broken connection on it and when trying to pull it off I ripped the entire top lid off.
So looks like replacing the piece and finally replacing the connector.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
11-06-2017, 07:01 PM | #2 |
|
12672471 air intake separator.
Is that your engine??? Apart?? Tape those ports closed!! If so, whats up now?? If it's a quick disconnect, you should have some from your whipple kit. If a broken stem, glue and sleeve it OOPS, whole lid?? Fix it...lol
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
11-06-2017, 07:06 PM | #3 | |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Quote:
Here's what it looks like under the connections haha.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
|
11-06-2017, 07:08 PM | #4 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Hey Brett. That part number says its no longer available for purchasing.
LOL
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
11-06-2017, 07:09 PM | #5 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Flex seal to the rescue
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
11-06-2017, 07:12 PM | #6 |
|
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
11-06-2017, 07:15 PM | #7 | |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Quote:
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
|
11-06-2017, 07:19 PM | #8 |
|
what me to send you the GOOD stuff??
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
11-06-2017, 07:23 PM | #9 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
I'm going to goggle that stuff there! I wonder if I can buy it locally,
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
11-06-2017, 07:28 PM | #10 | |
|
Quote:
If done right, it is done like factory. Shipping is cheaper then replacement....lol
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
|
11-06-2017, 07:29 PM | #11 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
LOL. True
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
11-06-2017, 07:37 PM | #12 |
|
PM your address again, I'll send it out tomorrow.
Discard the tip, cap tube and send it back
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
11-06-2017, 07:47 PM | #13 | |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Quote:
Thanks again man. You saved the day. This almost got me started on a cam swap earlier then I was expecting.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
|
11-06-2017, 07:55 PM | #14 | |
|
Quote:
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
|
|
|
Post Reply
|
|
|