[floridanick]

Does anyone know how to tap into the brake pedal wire for the purposes of activating a two-step?

2019 camaro 2SS A-10

[Choda]

I'll be doing this with my 16 next month. Should be a power wire off the pedal to tap into.

I did this on my old turbo truck.

power off brake pedal -> toggle under the dash -> positive in wire on the 2 step

This allows me to turn on the 2step by flipping the switch, otherwise itd be on every time i press the brake pedal. Not sure if thats ok or not but whatever.

[floridanick]

Originally Posted by Choda

I'll be doing this with my 16 next month. Should be a power wire off the pedal to tap into.

I did this on my old turbo truck.

power off brake pedal -> toggle under the dash -> positive in wire on the 2 step

This allows me to turn on the 2step by flipping the switch, otherwise itd be on every time i press the brake pedal. Not sure if thats ok or not but whatever.

I figured as much but would be nice if someone could post a picture of wire location so I can hope in an get it done during lunch break at the office tried searching with no luck

[Choda]

Originally Posted by floridanick

I figured as much but would be nice if someone could post a picture of wire location so I can hope in an get it done during lunch break at the office tried searching with no luck

Come on... get out there and find out which wire it is for me.

[1lE_1LE]

Did you ever figure it out? Also interested in putting a switch on my brake lights, albeit for a different reason