Display Screen Icons

2SSAustin · 01-05-2020, 08:45 PM

Was wondering if anyone knows if it is possible to get the 2019+ icons and display screen look into their 2016-18. I prefer the updated look a bit more.

Lemmy Camaro · 02-03-2020, 11:54 PM

I've been wondering this too. So far I haven't found anything sadly

arpad_m · 02-04-2020, 08:24 AM

I doubt it. The new infotainment is a complete overhaul with new hardware and new software, maybe even a new communication protocol.

There is no way GM will expend resources into a retrofit kit, they never do, they just want you to buy the newer car, and the job would be very expensive and risky for a third party, with a low sales potential (would you be willing to buy this for $3000 or even $2000?).

Now if it's just the icons and not the entire software you're after, there may be an easier way to hack that into our MyLink version, you could ask Chris at White Auto Media for example (https://www.whiteautoandmedia.com/), but even that would be a ton of work and money I'm afraid.

MP3BOOSTED · 02-04-2020, 08:46 AM

anyone figure out on how to get the boost gauge to stick on our cars from the infotainment screen????

arpad_m · 02-04-2020, 10:02 AM

Quote:

Originally Posted by MP3BOOSTED

anyone figure out on how to get the boost gauge to stick on our cars from the infotainment screen????

Nope. As per Chris,"The MAP sensor wont read boost at the OS level more than likely and if it does it likely doesn't broadcast it on the bus for the cluster to read since its an NA application."

Everyone runs a separate boost gauge instead, which is a bit ghetto IMO—I'd love to have it in the cluster ZL1 style as much as you do, but it doesn't seem worth the investment, I can't justify sinking a ton of money into a small convenience like this. When necessary, I read out the boost via my MPVI2.

MP3BOOSTED · 02-04-2020, 10:46 AM

Quote:

Originally Posted by arpad_m

Nope. As per Chris,"The MAP sensor wont read boost at the OS level more than likely and if it does it likely doesn't broadcast it on the bus for the cluster to read since its an NA application."

Everyone runs a separate boost gauge instead, which is a bit ghetto IMO—I'd love to have it in the cluster ZL1 style as much as you do, but it doesn't seem worth the investment, I can't justify sinking a ton of money into a small convenience like this. When necessary, I read out the boost via my MPVI2.

stinks, but i hear you, i'm running a banks gauge so i can put boost readings on there but just thought i'd ask.

LTwin86 · 02-11-2020, 12:25 PM

I think you need to change whole module, cost 700 usd.
https://www.infotainment.com/product...-radio-upgrade
But im not sure will it fit our screen or not, looks the same, but i heard new one have higher resolution, im not sure.
I never use car menu, because after i start it, i start android auto wireless connection, never see car menu.

01-05-2020, 08:45 PM	#1
2SSAustin Drives: 1LE 2SS Camaro Join Date: Sep 2018 Location: Canada SK Posts: 55	Display Screen Icons Was wondering if anyone knows if it is possible to get the 2019+ icons and display screen look into their 2016-18. I prefer the updated look a bit more.

02-04-2020, 08:24 AM	#3
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,606 View My Garage	I doubt it. The new infotainment is a complete overhaul with new hardware and new software, maybe even a new communication protocol. There is no way GM will expend resources into a retrofit kit, they never do, they just want you to buy the newer car, and the job would be very expensive and risky for a third party, with a low sales potential (would you be willing to buy this for $3000 or even $2000?). Now if it's just the icons and not the entire software you're after, there may be an easier way to hack that into our MyLink version, you could ask Chris at White Auto Media for example (https://www.whiteautoandmedia.com/), but even that would be a ton of work and money I'm afraid. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

02-04-2020, 08:46 AM	#4
MP3BOOSTED Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017 Location: San Antonio Texas Posts: 843	anyone figure out on how to get the boost gauge to stick on our cars from the infotainment screen???? __________________ Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw

02-03-2020, 11:54 PM	#2
Lemmy Camaro Theoren Hanks Drives: 17 Camaro SS Join Date: Dec 2017 Location: Sacramento Posts: 96 View My Garage	I've been wondering this too. So far I haven't found anything sadly

02-11-2020, 12:25 PM	#7
LTwin86 Drives: 2017 2LT RS Join Date: Nov 2018 Location: Moscow Posts: 151	I think you need to change whole module, cost 700 usd. https://www.infotainment.com/product...-radio-upgrade But im not sure will it fit our screen or not, looks the same, but i heard new one have higher resolution, im not sure. I never use car menu, because after i start it, i start android auto wireless connection, never see car menu.

User Name		Remember Me?
Password