03-14-2023, 08:16 PM | #1 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 220
|
Lower Steering Wheel Plaque
I'm not exactly sure what it's called, but the Plaque on the lower part of my steering wheel was peeling. Looked kind of ugly so I purchased a new replacement.
Taking off the old one and installing the new one was easy and only took a couple of minutes. The part is not glued and using a plastic automotive trim removal. I slid it in between the plaque and the steering wheel far enough to be able to lift the plaque free. I did it that was so as not to damage the leather. When installing the new one, slide it in on an angle under the air bag. When it's all the way up, lay it down and hit it in the center to seat it. The top one on my leg is the older one. I did notice that the part numbers are different.
__________________
Glenn
2017 Camaro 2LT RS Convertible |
03-15-2023, 06:53 AM | #2 |
|
Looks good! Mine did the same thing - the paint was peeling off. I took the part off and peeled/cleaned all the top coat of paint off. The peeling paint came off much like plasti-dip paint does. Once cleaned off it looked fine. It was just a little glossier but not that noticeable of a difference. I figured a new one would just start peeling again.
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
03-15-2023, 05:09 PM | #3 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 220
|
If I would have thought about it, I would have done the same. But would have picked up a rattle can and sprayed it.
__________________
Glenn
2017 Camaro 2LT RS Convertible |
02-27-2024, 04:02 PM | #4 |
Drives: 2017 Camaro 2LT - RS Convertible Join Date: Feb 2024
Location: North Texas
Posts: 2
|
Replacing the steering wheel F Cover
Thanks for the information. I was wondering how hard it was to get the old cover off.
When I bought my 2017 in December, the cover you mention looked much like yours, but to make it worse, some of the paint flecks were transferred to the leather. I've got the new cover ordered, but still have to figure out how to remove the flecks of paint from the steering wheel. |
02-27-2024, 04:20 PM | #5 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 12,025
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
Post Reply
|
|
|