Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 06-25-2022, 03:06 PM   #1
ZLRob
 
ZLRob's Avatar
 
Drives: Chevrolet Camaro ZL1
Join Date: May 2022
Location: Concordia
Posts: 436
HUD display vibration?

I've noticed the HUD vibrates under certain conditions while driving. Over bumps, the Bose stereo is playing loud or even under certain exhaust parts under throttle. I've also noticed, that the display is slightly off level.

I know there has been a thread regarding this as far as Gen 6's go, but there was never any resolve for it. I can't be the only one with these issues obviously. So does anyone else with a Z have these issues and has anyone resolved part, or all of it?

Link for reference:

https://www.camaro6.com/forums/showthread.php?t=452518
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ

ZLRob is offline   Reply With Quote
Old 06-25-2022, 03:46 PM   #2
mliebs
 
mliebs's Avatar
 
Drives: 2022 ZL1
Join Date: Aug 2013
Location: Houston TX
Posts: 118
I've had HUD in 2 of my Corvettes and never had a vibration problem but my C6 was slightly tilted (very slightly). Almost sounds like the piece that projects it to the windshield is loose.
mliebs is offline   Reply With Quote
Old 06-25-2022, 03:54 PM   #3
ZLRob
 
ZLRob's Avatar
 
Drives: Chevrolet Camaro ZL1
Join Date: May 2022
Location: Concordia
Posts: 436
Quote:
Originally Posted by mliebs View Post
I've had HUD in 2 of my Corvettes and never had a vibration problem but my C6 was slightly tilted (very slightly). Almost sounds like the piece that projects it to the windshield is loose.
That's what I'm wondering as well, but the other part of me wonders how difficult it is to get in there to check it out. I'd imagine you'd have to rip the dash apart to do so.

Edit: it appears the windshield has to come out before you even touch the dash. Then you have to rip the dash apart and THEN you can get in there to investigate. How annoying.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ


Last edited by ZLRob; 06-25-2022 at 04:20 PM.
ZLRob is offline   Reply With Quote
Old 06-25-2022, 04:32 PM   #4
SATINSTEEL1LE
Account Suspended
 
Drives: 21 ZL1
Join Date: Feb 2022
Location: South East
Posts: 662
Yeah my 18 ZL1 and my 21 ZL1 have no vibration in any condition.
SATINSTEEL1LE is offline   Reply With Quote
Old 06-25-2022, 04:56 PM   #5
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 11,494
No vibration here, but the HUD is very slightly tilted. I've gotten used to it.

2019+ software already allows rotating the HUD image.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
arpad_m is offline   Reply With Quote
Old 06-25-2022, 06:29 PM   #6
ckt227
 
Drives: CHEVROLET CORVETTE
Join Date: Feb 2021
Location: SWFL
Posts: 513
That sucks and it looks like out of warranty. Six Vettes and four Camaro's and no HUD issues.
ckt227 is offline   Reply With Quote
Old 06-25-2022, 06:30 PM   #7
SATINSTEEL1LE
Account Suspended
 
Drives: 21 ZL1
Join Date: Feb 2022
Location: South East
Posts: 662
Quote:
Originally Posted by arpad_m View Post
No vibration here, but the HUD is very slightly tilted. I've gotten used to it.

2019+ software already allows rotating the HUD image.
You can adjust that in the menus. I adjusted mine too. Looked like it was going downhill slightly.
SATINSTEEL1LE is offline   Reply With Quote
Old 06-25-2022, 09:26 PM   #8
ZLRob
 
ZLRob's Avatar
 
Drives: Chevrolet Camaro ZL1
Join Date: May 2022
Location: Concordia
Posts: 436
Quote:
Originally Posted by arpad_m View Post
No vibration here, but the HUD is very slightly tilted. I've gotten used to it.

2019+ software already allows rotating the HUD image.
Where is that on HPTuners? Or is that something that is accessible via scan tool?
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ

ZLRob is offline   Reply With Quote
Old 06-25-2022, 10:58 PM   #9
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 11,494
Quote:
Originally Posted by SATINSTEEL1LE View Post
You can adjust that in the menus. I adjusted mine too. Looked like it was going downhill slightly.
Quote:
Originally Posted by ZLRob View Post
Where is that on HPTuners? Or is that something that is accessible via scan tool?
I can't adjust it, 2018 here with the "old" MyLink infotainment software that has no such capability. I don't think this is accessible via HP Tuners either, as this logic isn't in the ECM, TCM or FSCM, and the dispaly rotation angle is probably hardcoded anyway.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
arpad_m is offline   Reply With Quote
Old 06-26-2022, 01:29 AM   #10
ZLRob
 
ZLRob's Avatar
 
Drives: Chevrolet Camaro ZL1
Join Date: May 2022
Location: Concordia
Posts: 436
Quote:
Originally Posted by arpad_m View Post
I can't adjust it, 2018 here with the "old" MyLink infotainment software that has no such capability. I don't think this is accessible via HP Tuners either, as this logic isn't in the ECM, TCM or FSCM, and the dispaly rotation angle is probably hardcoded anyway.
Ah man, that sucks. I was really hoping there was a way to adjust it, because it's not totally level. It's a little annoying. Oh well I guess.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ

ZLRob is offline   Reply With Quote
Old 06-26-2022, 01:44 AM   #11
2SS Capt
2020 Shadow Gray 2SS
 
2SS Capt's Avatar
 
Drives: 2020 2SS - A10, NPP, MRC, CAI
Join Date: Dec 2019
Location: San Diego (North County), CA
Posts: 2,983
No HUD vibration issues in my 2020 2SS... Sounds like something is loose somewhere...
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires

Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph...
2SS Capt is offline   Reply With Quote
Old 06-26-2022, 10:41 PM   #12
Mac7504
 
Mac7504's Avatar
 
Drives: 2003 Monte Carlo SS SLP, 2022 ZL1
Join Date: Aug 2021
Location: Los Angeles, CA
Posts: 480
Quote:
Originally Posted by SATINSTEEL1LE View Post
You can adjust that in the menus. I adjusted mine too. Looked like it was going downhill slightly.
That's cool, mine is fine but I didn't know this. I really need to crack the owners manual soon.
Mac7504 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:12 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.