You are browsing camaro6 
03-10-2022, 03:37 PM
|
#1 |
 Drives: 16 2SS Join Date: Nov 2021
Location: NC
Posts: 13
|
Pop when making sharp turns.
Took the car to the track for the first time since I bought it back in Oct. Made 3 passes with it. After the first pass i heard it pop when going around a car in the lanes but, didn’t pay any attention to it. When going home i noticed it would pop when making sharp turns left and right and there is a small shift in the the rear end when it pops. Has anyone had this issue before?
|
|
|
|
03-10-2022, 05:36 PM
|
#2 |
           
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
track as is in road race or drag or?
__________________
 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS |
|
|
|
03-10-2022, 05:46 PM
|
#3 |
 
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,598
|
Most likely drag racing. OP, did you check your rear wheels and lugnuts?
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
03-10-2022, 10:25 PM
|
#4 |
|
Drives: 16 2SS Join Date: Nov 2021
Location: NC
Posts: 13
|
Took to the drag strip. Sadly, there isn’t a road course near me. I did not check the lug nuts. I will look at that. The car has probably 25 -30 street passes with the draggy but, the first pass at the strip it hook better that I thought it would. I’m going to put in on the lift tomorrow if I get a chance and look around. Hoping it something simple.
|
|
|
|
|
03-11-2022, 01:38 PM
|
#5 |
|
Drives: 16 2SS Join Date: Nov 2021
Location: NC
Posts: 13
|
Well, took it to my dads shop and the clutches are sticking in the rear differential. Gotta get some fluid and additive so we can crack it open.
|
|
|
|
|
03-11-2022, 06:47 PM
|
#6 |
|
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,675
|
How did you determine that?
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
|
|
|
|
03-12-2022, 11:17 AM
|
#7 |
|
Drives: 16 2SS Join Date: Nov 2021
Location: NC
Posts: 13
|
He drove it. Listened to how it would pop only when turning. He has been a ASE certified tech since the 90s. Rebuilds differentials in just about anything. Has also raced just about anything with a engine in it.
|
|
|
|
|
03-12-2022, 12:31 PM
|
#8 |
|
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,675
|
Ah nice. A lot of use are using the oe fluid that is premixed with additive. So the amount is correct and don’t have to mess with having too much or too little
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
