07-09-2023, 08:40 PM | #1 |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
sold - delete
SOLD
Last edited by Katech_Zach; 01-10-2024 at 07:37 AM. Reason: SOLD |
07-09-2023, 10:03 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Would separate front pads?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-10-2023, 07:01 AM | #3 |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
|
07-13-2023, 03:41 PM | #4 |
Someone BUY THIS!!!
__________________
2018 Camaro SS 1LE - 2011 370z - 2004 VW R32 - 2000 Civic Si Mods: Rotofab, Nick Williams 103mm TB, MSD IM, Kooks 1 7/8 Results: 470 hp / 447 tq |
|
07-17-2023, 06:07 PM | #5 |
Drives: 2022 SS 1LE Join Date: Jun 2023
Location: CA
Posts: 28
|
I think C7 Z06 front caliper is same as SS 1LE not ZL1 1LE.
|
07-17-2023, 07:49 PM | #6 |
Drives: 2020 Camaro SS 1LE Join Date: Apr 2022
Location: Miami
Posts: 227
|
If those rotors will work on my ss 1LE with the OEM caliper im interested in those.
|
07-18-2023, 07:52 AM | #7 |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
|
07-18-2023, 04:08 PM | #8 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
If I’m not mistaken the BZ’s are the same as a CCM caliper.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-14-2023, 10:30 AM | #9 |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
Bump
|
01-09-2024, 11:05 AM | #10 |
Drives: 2019 Camaro SS Join Date: Jan 2023
Location: Alabama
Posts: 9
|
Will it be a direct swap to 6th gen Camaros?
(C7 Z06 Caliper, Disks) |
01-09-2024, 11:17 PM | #11 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Calipers are a direct fit but I believe you’ll have to swap the rotor hats if you have a 2pc rotor.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
Post Reply
|
|
|