09-27-2022, 12:19 PM | #1 |
Drives: 2023 Camaro ZL1 Join Date: Sep 2022
Location: Detroit, Michigan
Posts: 46
|
ZL1 ROTO FAB question
I was wondering why some people do not add the plastic tube connecting to the throttle body directly from roto-fab instead they use the stock one from gm. Is the stock one better? does it fit properly with the roto?
|
09-27-2022, 12:32 PM | #2 |
Petro-sexual
|
Could be so the MAF doesn't go bonkers. Even the the standard RF alleges it doesn't require a tune (and for the record, mine didn't), but it could be those people didn't have the same luck. I'd imagine if they used the OEM elbow, it was to keep a code from popping up.
I wouldn't know for certain though. I didn't have that issue.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // TooHighPSI Port Injection // FF // Katech Dual In-Tank // Soler 103 // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
09-27-2022, 12:49 PM | #3 |
Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 1,960
|
I used and followed RF instructions on my 23 ZL1, I haven't seen or read this not using it anywhere.
|
09-27-2022, 01:20 PM | #4 |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
Yeah havent heard that. Before the maggie went on mine, I used the complete RF kit (non BG), and it worked great. Lots more scream from the factory blower.
|
09-27-2022, 01:46 PM | #5 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,458
|
I've never seen or heard of anyone doing this? Where did you hear it?
__________________
|
09-28-2022, 06:25 AM | #6 |
Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016
Location: Georgia
Posts: 5,802
|
I have never heard of this before either and I’m not sure if the stock intake tube would hook up to the RotoFab intake anyway.
__________________
ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.
|
09-28-2022, 11:08 AM | #7 |
Petro-sexual
|
I've seen a couple pictures of this, but don't know why people do it, honestly.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // TooHighPSI Port Injection // FF // Katech Dual In-Tank // Soler 103 // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
Post Reply
|
Thread Tools | |
|
|