09-29-2022, 08:32 PM | #15 |
2Spdsy
Drives: 2021 Camaro LT1 A10 Join Date: Mar 2016
Location: Mission hills
Posts: 122
|
Appreciate it man
I didn't know that about the skinnies So the brakes aren't a street friendly thing either? __________________ The brakes are fine on the street. I drive my car on the street all the time . They stop as good as the Brembos . |
09-30-2022, 08:32 AM | #16 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,556
|
Surely you can get some ideas from this list?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
09-30-2022, 06:09 PM | #17 |
Drives: 2022 LT1 Camaro Join Date: Nov 2021
Location: Fort Wayne
Posts: 43
|
That list is kinda vague on what was done to the cars and leaves details out. Like PTB could mean ported stock? Ported 95mm? Doesn't specify what intake manifolds they're running either. I'm looking for the little things that maximize the setup I have. The air plate was a good idea.
__________________
10.92 @129.3mph
|
10-01-2022, 08:24 AM | #18 | |
Drives: 98 Camaro Join Date: Apr 2022
Location: MD
Posts: 274
|
Quote:
|
|
10-01-2022, 08:37 AM | #19 |
Drives: 98 Camaro Join Date: Apr 2022
Location: MD
Posts: 274
|
Mine was bone stock and I added a drop in k&n and took the plate off and it went 1mph quicker in the 1/4 in similar air. Just added lt2 intake. That was worth a little over a tenth and 1.5mph. Biggest gain was with the stickier Bridgestone tires. Been a 1.78 60ft and 3.69 0-60 on the street with the dragy
|
10-01-2022, 11:25 AM | #20 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,556
|
Quote:
PTB (ported OEM to 93mm or 95) LT High flow cats Race gas E85 Jenny Craig weight loss diet Tune Drag radials It's a menu to choose from. The hp gain of each mod has been discussed here endlessly.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
10-02-2022, 05:58 AM | #21 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
The list probably hasn't been updated in a long time.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
10-02-2022, 08:38 AM | #22 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,556
|
I'm sure. I posted the image only to show the various mods others have used to go faster.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
|
Post Reply
|
|
|