No more Whipple maybe?

Drew145022 · 03-15-2021, 08:52 AM

Did Whipple cancel there LT1 camaro ss kit?? I have been looking and they don’t have them on there website anymore you can still find them on some site but they are running out.

Joshinator99 · 03-15-2021, 09:49 AM

Quote:

Originally Posted by Drew145022

Did Whipple cancel there LT1 camaro ss kit?? I have been looking and they don’t have them on there website anymore you can still find them on some site but they are running out.

I’m assuming that they’re going to offer either the new 3.0 or even the new 3.8 for us soon.

ZO6Ted · 03-15-2021, 09:57 AM

Agreed I think that is the case.

EDFHOBBIES · 03-15-2021, 01:30 PM

Quote:

Originally Posted by Drew145022

Did Whipple cancel there LT1 camaro ss kit?? I have been looking and they don’t have them on there website anymore you can still find them on some site but they are running out.

Which kit I'll text Nick at whipple

EDFHOBBIES · 03-15-2021, 01:52 PM

No info

KingLT1 · 03-15-2021, 02:45 PM

My guess is it will be a 3.0. The 3.8 likely isn't going to fit as EFhobbies just posted and it's more supercharger then most will ever need.

Side note that some might find interesting... there has been some testing done with the Eaton TVS3100 rotor pack by Kong performance.

Puddin · 03-15-2021, 03:01 PM

Quote:

Originally Posted by KingLT1

My guess is it will be a 3.0. The 3.8 likely isn't going to fit as EFhobbies just posted and it's more supercharger then most will ever need.

Side note that some might find interesting... there has been some testing done with the Eaton TVS3100 rotor pack by Kong performance.

Yea VMP said the same thing for the 3100s for the mustangs. Looks like the 2.65 is the sweet spot for either platform. VMP even went as far as canceling any further development on the 3100 rotor pack.

laynlo15 · 03-16-2021, 07:52 AM

VMP was using the Magnuson blowers and have been since the 2650 which has been a killer package for Magnuson/Vmp. They started building that when I was with Magnuson back in 2019 and 2020.

Puddin · 03-16-2021, 08:19 AM

Here is a link where they go into further detail about it. https://m.facebook.com/VMPTuning/vid...0753521136584/

Drew145022 · 03-20-2021, 11:01 AM

Well this is good news I am saving for it and I’m not far from pulling the trigger in it. Now I’m gonna have to decide if I get it from another site or wait and see what they are coming out with...

PeteSS2018 · 03-20-2021, 09:52 PM

To be honest, with the rattle noise that the 2.9 Whipple makes on mine (has always made), I've always regretted going with them rather than Maggie or Edelbrock. It makes good power but the noise is just very ugly on what should be a sweet sounding car.

KingLT1 · 03-21-2021, 09:19 AM

Whipple 3.0 has been 7.9 in the 1/4mi on the Coyote platform and made 1200+whp. It will be plenty of unit for the masses on GM stuff.

Quote:

Originally Posted by PeteSS2018

To be honest, with the rattle noise that the 2.9 Whipple makes on mine (has always made), I've always regretted going with them rather than Maggie or Edelbrock. It makes good power but the noise is just very ugly on what should be a sweet sounding car.

That noise is from the slow blower speed due to the large pulley and low idle rpm. A 3.5+ pulley with a 550-600rpm engines idle speed causes the gear case to make that noise. When you pulley down and/or raise idle rpm it quiets down.

PeteSS2018 · 03-22-2021, 01:16 AM

Quote:

Originally Posted by KingLT1

Whipple 3.0 has been 7.9 in the 1/4mi on the Coyote platform and made 1200+whp. It will be plenty of unit for the masses on GM stuff.

That noise is from the slow blower speed due to the large pulley and low idle rpm. A 3.5+ pulley with a 550-600rpm engines idle speed causes the gear case to make that noise. When you pulley down and/or raise idle rpm it quiets down.

Thanks, yes Im aware of that being a common issue. Mind you mine still has some rattle above idle and seems to have gotten louder not quieter over time. I actually wonder if its the coupler/front bearing (assuming there is one?) rather than the screws. Despite that, its an annoying sound for an otherwise great sounding car.

PeteSS2018 · 03-28-2021, 07:46 PM

Quote:

Originally Posted by KingLT1

Whipple 3.0 has been 7.9 in the 1/4mi on the Coyote platform and made 1200+whp. It will be plenty of unit for the masses on GM stuff.

That noise is from the slow blower speed due to the large pulley and low idle rpm. A 3.5+ pulley with a 550-600rpm engines idle speed causes the gear case to make that noise. When you pulley down and/or raise idle rpm it quiets down.

As it turns out, the noise is from a failure in the snout; the coupler had effectively started to disintegrate and the drive bearing has failed. Its been off the road now waiting for parts for one and half weeks, and expected at least still 2 weeks off.

So my feeling about Whipple at the moment is; great when they're working, but not reliable.

Not the best choice based on my experience and the apparent long list of noise/breakages etc.

03-15-2021, 08:52 AM	#1
Drew145022 Drives: 2017 Camaro 2SS Vert Join Date: Apr 2019 Location: Texas Posts: 161	No more Whipple maybe? Did Whipple cancel there LT1 camaro ss kit?? I have been looking and they don’t have them on there website anymore you can still find them on some site but they are running out.

03-15-2021, 01:52 PM	#5
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	No info Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

03-15-2021, 02:45 PM	#6
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,787	My guess is it will be a 3.0. The 3.8 likely isn't going to fit as EFhobbies just posted and it's more supercharger then most will ever need. Side note that some might find interesting... there has been some testing done with the Eaton TVS3100 rotor pack by Kong performance. Attached Images __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

03-16-2021, 07:52 AM	#8
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	VMP was using the Magnuson blowers and have been since the 2650 which has been a killer package for Magnuson/Vmp. They started building that when I was with Magnuson back in 2019 and 2020. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

03-20-2021, 09:52 PM	#11
PeteSS2018 Drives: 2018 2SS Camaro Join Date: Mar 2020 Location: Melbourne, Australia Posts: 91	To be honest, with the rattle noise that the 2.9 Whipple makes on mine (has always made), I've always regretted going with them rather than Maggie or Edelbrock. It makes good power but the noise is just very ugly on what should be a sweet sounding car. __________________ 2018 2SS, Hyper Blue, Australian HSV delivered 2.9L Whipple 98RON tuned 650hp/850Nm Elite Engineering E2 Catch Can Eibach Prokit springs Mamo LT1 Ported TB

03-15-2021, 09:57 AM	#3
ZO6Ted Old badass Drives: 14GMC 2.9 16GMC Turbos 2020Silv.6.2 Join Date: Mar 2020 Location: Arlington Tx Posts: 238	Agreed I think that is the case.

03-16-2021, 08:19 AM	#9
Puddin Drives: 2016 Camaro 2SS Join Date: Apr 2018 Location: Central Texas Posts: 1,011	Here is a link where they go into further detail about it. https://m.facebook.com/VMPTuning/vid...0753521136584/

03-20-2021, 11:01 AM	#10
Drew145022 Drives: 2017 Camaro 2SS Vert Join Date: Apr 2019 Location: Texas Posts: 161	Well this is good news I am saving for it and I’m not far from pulling the trigger in it. Now I’m gonna have to decide if I get it from another site or wait and see what they are coming out with...

User Name		Remember Me?
Password