WTB MGW shifter for 2015 V6 Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

premad · 03-04-2017, 08:45 AM

Does anyone know if there is any places that has a left over MGW shifter laying around for the V6 Camaro? Would like to buy one for my car but with the new version they are not making them for the V6 anymore.

Thanks for you help in advance.

FastGirl · 03-06-2017, 08:35 PM

no one has left overs, because they were never stocked anywhere but at MGW. I got lucky and bought one from someone who never installed one he bought and traded his car for a 6th gen...

premad · 03-07-2017, 10:20 AM

Quote:

Originally Posted by FastGirl

no one has left overs, because they were never stocked anywhere but at MGW. I got lucky and bought one from someone who never installed one he bought and traded his car for a 6th gen...

Thanks for the response FastGril. Did not realize they did not make extras.

Maybe someone on the forum might have one they pulled out of a car they sold and wants to sell it.

FastGirl · 03-07-2017, 07:44 PM

Just be sure the one you get is definitely for a V6, I didn't know the ones for the V8 were different. When I called MGW, they said if you got a V8 one and found the V6 arms, you need to send them the V8 shifter back so they can reposition the pin...If I hear of any V6 guys selling I'll message you as well... Good Luck :-)

premad · 03-08-2017, 06:24 AM

Quote:

Originally Posted by FastGirl

Just be sure the one you get is definitely for a V6, I didn't know the ones for the V8 were different. When I called MGW, they said if you got a V8 one and found the V6 arms, you need to send them the V8 shifter back so they can reposition the pin...If I hear of any V6 guys selling I'll message you as well... Good Luck :-)

Good points, thank you for this information. Let me know if you hear of any available as the MGW shifter sounds like a top notch shifter. I may go with a Hurst if I can not find one.

Nesfes · 04-16-2017, 02:46 PM

I have one I pulled out of my car. It's in perfect
Condition with instructions and everything. I can sell it to you if you want.

premad · 04-16-2017, 06:10 PM

Quote:

Originally Posted by Nesfes

I have one I pulled out of my car. It's in perfect
Condition with instructions and everything. I can sell it to you if you want.

PM'ed you.

FastGirl · 04-21-2017, 11:16 PM

so did you buy it...weather was finally nice enough last weekend and installed mine. Love it, got to post up my used Barton now, such a difference. You will love it!

premad · 04-22-2017, 08:44 AM

Quote:

Originally Posted by FastGirl

so did you buy it...weather was finally nice enough last weekend and installed mine. Love it, got to post up my used Barton now, such a difference. You will love it!

Yes, I bought the shifter from Alex

. Currently it is with UPS and I can't wait to get it so I can get it installed! Alex was awesome to work with and transaction was smooth. Hope the install is not to hard.

FastGirl · 05-04-2017, 10:41 PM

I finally got mine installed a few weeks ago. It wasn't that hard to do. the hardest part for me was popping the clip on the pins that holds the Arms in place. the install video shows how to pop the clips on a 2014/2015...by putting a supplied allen wrench into a hole the would push on the clip and release it...well my 2013 didn't have a hole by the clips, got them off, but it took a bit of time for me.

I love this shifter. so much better than the stock, and in my opinion better than Batron as well. I'll be selling my Barton, wsh I went with MGW from the start. :-)

premad · 05-06-2017, 01:39 PM

Quote:

Originally Posted by FastGirl

I finally got mine installed a few weeks ago. It wasn't that hard to do. the hardest part for me was popping the clip on the pins that holds the Arms in place. the install video shows how to pop the clips on a 2014/2015...by putting a supplied allen wrench into a hole the would push on the clip and release it...well my 2013 didn't have a hole by the clips, got them off, but it took a bit of time for me.

I love this shifter. so much better than the stock, and in my opinion better than Batron as well. I'll be selling my Barton, wsh I went with MGW from the start. :-)

Just installed mine, took about an hour to do. I did not have to mess with the transmission bracket or heat shield. Stock one slide right out and MGW slide right in place. I had the same issue with the clips but used a screw drive to pop them out. Only thing I do not like is that the shifting is not as smooth as I would have thought. Pattern is nice and tight but when shifting into gear it makes more noise than the stock one. I would have thought it would be smoother but maybe it is just me

McGrew · 07-07-2017, 02:20 PM

Hey guys im also looking for a MGW short throw for my v6, if you guys know anyone please let me know.

premad · 07-07-2017, 02:26 PM

Quote:

Originally Posted by McGrew

Hey guys im also looking for a MGW short throw for my v6, if you guys know anyone please let me know.

Will do, if I hear of any.
I bought the flat stick for mine and love it.

McGrew · 07-07-2017, 04:33 PM

Quote:

Originally Posted by premad

Will do, if I hear of any.
I bought the flat stick for mine and love it.

alright thanks bro! im cool with any one. i just want the short throw. PM me if you find one

03-04-2017, 08:45 AM	#1
premad Drives: 2012 Camaro SS Join Date: Feb 2016 Location: Syracuse Posts: 67	WTB MGW shifter for 2015 V6 Camaro Does anyone know if there is any places that has a left over MGW shifter laying around for the V6 Camaro? Would like to buy one for my car but with the new version they are not making them for the V6 anymore. Thanks for you help in advance. __________________ 2012 Camaro 2SS 1971 Monte Carlo SS 454 2006 Cobalt SS

03-06-2017, 08:35 PM	#2
FastGirl Drives: 2013 2LT/RS Join Date: Oct 2014 Location: Budd Lake, NJ Posts: 129 View My Garage	no one has left overs, because they were never stocked anywhere but at MGW. I got lucky and bought one from someone who never installed one he bought and traded his car for a 6th gen... __________________

03-07-2017, 07:44 PM	#4
FastGirl Drives: 2013 2LT/RS Join Date: Oct 2014 Location: Budd Lake, NJ Posts: 129 View My Garage	Just be sure the one you get is definitely for a V6, I didn't know the ones for the V8 were different. When I called MGW, they said if you got a V8 one and found the V6 arms, you need to send them the V8 shifter back so they can reposition the pin...If I hear of any V6 guys selling I'll message you as well... Good Luck :-) __________________

04-16-2017, 02:46 PM	#6
Nesfes VSIX 1LE Drives: 2013 Camaro V6 1LE Join Date: Sep 2013 Location: Lakeway, Tx Posts: 57 View My Garage	I have one I pulled out of my car. It's in perfect Condition with instructions and everything. I can sell it to you if you want. __________________ Alex Nestor Fesas 2013 Camaro V6 1LE

04-21-2017, 11:16 PM	#8
FastGirl Drives: 2013 2LT/RS Join Date: Oct 2014 Location: Budd Lake, NJ Posts: 129 View My Garage	so did you buy it...weather was finally nice enough last weekend and installed mine. Love it, got to post up my used Barton now, such a difference. You will love it! __________________

05-04-2017, 10:41 PM	#10
FastGirl Drives: 2013 2LT/RS Join Date: Oct 2014 Location: Budd Lake, NJ Posts: 129 View My Garage	I finally got mine installed a few weeks ago. It wasn't that hard to do. the hardest part for me was popping the clip on the pins that holds the Arms in place. the install video shows how to pop the clips on a 2014/2015...by putting a supplied allen wrench into a hole the would push on the clip and release it...well my 2013 didn't have a hole by the clips, got them off, but it took a bit of time for me. I love this shifter. so much better than the stock, and in my opinion better than Batron as well. I'll be selling my Barton, wsh I went with MGW from the start. :-) __________________

07-07-2017, 02:20 PM	#12
McGrew Drives: 2015 white Commemorative eddtion RS Join Date: Nov 2015 Location: Fort Worth, Texas Posts: 5	Anyone selling? Hey guys im also looking for a MGW short throw for my v6, if you guys know anyone please let me know.