Can I break into the 11's? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

racesloth · 02-20-2015, 09:01 AM

My 2010 M6 SS has cam, LT headers, Corsa cat back and full BMR suspension (1" springs, Koni STRs, lwr control arms, toelinks, trailing arms) it makes 477rwhp 449rwtq. I have Michellin 315 Pilot Supersports on a 10.5 F14 rear wheel. With some good launching is a 11.99 possible? Going to take it to Santapod, UK dragway as soon as it warms up. Next mod is 3.91 and good cradle mounts...

Spartan01 · 02-20-2015, 09:10 AM

it is possible with a really good hook, but an M6 has a disadvantage against an L99 in the 1/4

Look into cutting weight.

Are you running a CAI and scoop?
Ported throttle body?
Vitesse Throttle Controller?
I also gained 7.5 RWHP with my cutouts open.

62nalide · 02-20-2015, 10:24 AM

Yes 11.90s are there....

That Vitesse throttle controller is NOT going to Help you in ANY way save your money on another mod.

Pro Stock John · 02-20-2015, 10:27 AM

I haven't seen too many M6 friends hook 11's on street tires...

fif_gen_powa · 02-20-2015, 11:04 AM

I did with 100 shot on top of intake and headers which made 424whp w/o nitrous. Stock clutch is on its way out and will stick to the floor if I slip it or launch aggressively. 11.9@119 with. 2.0 60 ft. Bogs badly out of the hole just letting the clutch out at 3k rpm. 315/35r20 pilot super sport, full weight nothing taken out with 260 lb driver and big tool box in the trunk also

With a new clutch I'm aiming for 11.50s

Spartan01 · 02-20-2015, 11:30 AM

Quote:

Originally Posted by 62nalide

Yes 11.90s are there....

That Vitesse throttle controller is NOT going to Help you in ANY way save your money on another mod.

some people have reported small gains as it can improve acceleration.

62nalide · 02-20-2015, 11:54 AM

Quote:

Originally Posted by Spartan01

some people have reported small gains as it can improve acceleration.

Driving habits yes, HP and or track gains no. Waste of money for the performance guys hitting the track actually it'll hurt your 1/4 mile times. Street driving and street fun it'll react different no doubt.

Spartan01 · 02-20-2015, 11:58 AM

I thought I read on here somewhere that a guy lost 1/10th of a second off his 1/4 time?

JKO · 02-20-2015, 12:09 PM

Wife ran 12.18 w/ just bolt ons pretty sure it has 12:0's in it so w/good tires i see no reason a cammed car wouldn't be in the 11's

Pro Stock John · 02-20-2015, 12:19 PM

Yeah but you are auto JKO. Btw nice ET what was the mph?

Smirnoff · 02-20-2015, 01:08 PM

Quote:

Originally Posted by Pro Stock John

I haven't seen too many M6 friends hook 11's on street tires...

^^^
This.....

Camarojt · 02-21-2015, 12:18 PM

Quote:

Originally Posted by racesloth

My 2010 M6 SS has cam, LT headers, Corsa cat back and full BMR suspension (1" springs, Koni STRs, lwr control arms, toelinks, trailing arms) it makes 477rwhp 449rwtq. I have Michellin 315 Pilot Supersports on a 10.5 F14 rear wheel. With some good launching is a 11.99 possible? Going to take it to Santapod, UK dragway as soon as it warms up. Next mod is 3.91 and good cradle mounts...

Is it possible?? Yes.
Is it likely?? No

You have 3 pretty decent obstacles working against you.
Stock tires
Stock weight
(And you are 240 on top of that.)
And stock clutch.
There are a few really good drivers out there than can still stick a 1.90 60ft on stock tires but it's not easy.

My advice, drop weight and get some DR's and if you can, get a clutch.
Your rear suspension is pretty good.

JKO · 02-21-2015, 03:02 PM

Quote:

Originally Posted by Pro Stock John

Yeah but you are auto JKO. Btw nice ET what was the mph?

Mph was 115.74

2010SSRSM6 · 02-22-2015, 05:13 AM

I've cut 1.7's on the stock p-zeros consistently and couldn't break into the 11's. 12.08 was my best @ 460rwhp and that was with a crap 1.92 60'.

Sent from my iPhone using Tapatalk

02-20-2015, 09:01 AM	#1
racesloth Dan Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013 Location: Georgia, USA not the other one Posts: 1,041	Can I break into the 11's? My 2010 M6 SS has cam, LT headers, Corsa cat back and full BMR suspension (1" springs, Koni STRs, lwr control arms, toelinks, trailing arms) it makes 477rwhp 449rwtq. I have Michellin 315 Pilot Supersports on a 10.5 F14 rear wheel. With some good launching is a 11.99 possible? Going to take it to Santapod, UK dragway as soon as it warms up. Next mod is 3.91 and good cradle mounts... __________________ Dan 2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi

02-20-2015, 09:10 AM	#2
Spartan01 Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013 Location: Falls Church, Virginia Posts: 3,600	it is possible with a really good hook, but an M6 has a disadvantage against an L99 in the 1/4 Look into cutting weight. Are you running a CAI and scoop? Ported throttle body? Vitesse Throttle Controller? I also gained 7.5 RWHP with my cutouts open. __________________ "You simply cannot trust quotes found on the internet." -Abraham Lincoln

02-20-2015, 10:24 AM	#3
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	Yes 11.90s are there.... That Vitesse throttle controller is NOT going to Help you in ANY way save your money on another mod. __________________ https://frankensteined.net/ Martin@Frankensteined.net

02-20-2015, 10:27 AM	#4
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	I haven't seen too many M6 friends hook 11's on street tires... __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

02-20-2015, 11:04 AM	#5
fif_gen_powa Drives: 2013 Camaro SS Turbo Join Date: Apr 2014 Location: South Florida Posts: 1,525	I did with 100 shot on top of intake and headers which made 424whp w/o nitrous. Stock clutch is on its way out and will stick to the floor if I slip it or launch aggressively. 11.9@119 with. 2.0 60 ft. Bogs badly out of the hole just letting the clutch out at 3k rpm. 315/35r20 pilot super sport, full weight nothing taken out with 260 lb driver and big tool box in the trunk also With a new clutch I'm aiming for 11.50s __________________ 388ci 91/104 Turbo TH400 8.3@164 https://instagram.com/turbo_ls3/

02-20-2015, 11:58 AM	#8
Spartan01 Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013 Location: Falls Church, Virginia Posts: 3,600	I thought I read on here somewhere that a guy lost 1/10th of a second off his 1/4 time? __________________ "You simply cannot trust quotes found on the internet." -Abraham Lincoln

02-20-2015, 12:09 PM	#9
JKO Drives: 2016 2 SS Join Date: Jun 2014 Location: South Louisiana Posts: 154	Wife ran 12.18 w/ just bolt ons pretty sure it has 12:0's in it so w/good tires i see no reason a cammed car wouldn't be in the 11's __________________ 69 Camaro 461 BBC street car 2020 ZL1 .

02-20-2015, 12:19 PM	#10
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Yeah but you are auto JKO. Btw nice ET what was the mph? __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

02-22-2015, 05:13 AM	#14
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,558 View My Garage	I've cut 1.7's on the stock p-zeros consistently and couldn't break into the 11's. 12.08 was my best @ 460rwhp and that was with a crap 1.92 60'. Sent from my iPhone using Tapatalk __________________ UNDER CONSTRUCTION......again......